AEG SATELLITECLEAN 6000 Panduan Pengguna - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin pencuci piring AEG SATELLITECLEAN 6000. AEG SATELLITECLEAN 6000 28 halaman.
Halaman Cetak
How to set the water softener
level
Make sure the appliance is in user mode.
1. Press Program.
• The indicator
• The remaining indicators are off.
• The display shows the current
setting: e.g.
2. Press Program repeatedly to change
the setting.
3. Press the on/off button to confirm the
setting.
7.3 The rinse aid level
The rinse aid helps to dry the dishes
without streaks and stains. It is
automatically released during the hot
rinse phase.
It is possible to set the released quantity
of rinse aid between level 1 (minimum
quantity) and level 8 (maximum quantity).
Factory setting: level 5.
When the rinse aid chamber is empty,
the rinse aid indicator is on, notifying to
refill rinse aid. If the drying results are
satisfactory while using multi-tablets only,
it is possible to deactivate the dispenser
and the indicator. However, for the best
drying performance, always use rinse aid
and keep the rinse aid indicator active.
To deactivate the rinse aid dispenser and
indicator, set the level of rinse aid to 0.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press Start.
• The indicator
flashes.
• The remaining indicators are off.
• The display shows the current
setting: e.g.
2. Press Start repeatedly to change the
setting.
3. Press the on/off button to confirm the
setting.
7.4 AirDry
AirDry improves the drying results with
less energy consumption. The appliance
still flashes.
= level 5.
still
= level 4.
door opens automatically during the
drying phase and remains ajar.
AirDry is automatically activated with all
programmes other than
applicable).
The duration of the drying phase and the
door opening time vary depending on the
selected programme and options.
When AirDry opens the door, the display
shows the remaining time of the running
programme.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
If, afterwards, the door is
closed for at least 3 minutes,
the running programme
ends.
CAUTION!
If children have access to
the appliance, we advise to
deactivate AirDry. The
automatic opening of the
door may pose a danger.
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press Delay.
• The indicator
• The remaining indicators are off.
• The display shows the current
setting:
–
= AirDry is deactivated.
ENGLISH
13
(if
still flashes.