AEG VVW6020A Buku Petunjuk - Halaman 32

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Mesin pencuci piring AEG VVW6020A. AEG VVW6020A 48 halaman. 12 place settings

Halaman Cetak

before first use

Prior to using the machine for the first time please check whether the electricity and supply water specifications match the values

indicated by the installation instructions for the appliance.

Remove all packaging materials inside the machine.

Fill the salt reservoir and fill up with water until it almost overflows. Set the water hardness setting.

Fill the rinse aid reservoir.

FILLING THE SALT RESERVOIR

For a good washing result, the dishwasher needs soft, i.e. less calcareous water. Otherwise, white lime residues will remain on the

dishes and the interior of the dishwasher. This has a negative effect on your applinace's washing, drying and shining performance. For

this purpose, dishwasher salt is used.

• Remove the lower basket and unscrew the cap of the salt reservoir

(1).

• Place the provided funnel into the opening and fill with salt till the

overflow level, about 1.5 kg (2).

• Fill the reservoir before first use with water. It is normal for a little

water to flow out of the opening when doing this.

• Screw the cap back on firmly.

ATTENTION!

• Remove any spilled salt and run a full program to prevent corrosion

to the bottom.

• Refill the salt reservoir when the indicator light of the salt reservoir

lights up.

SETTING THE SALT CONSUMPTION

To find out the water hardness level in your area, contact your local water company. Adjust the salt consumption according to the

table on the next page.

Note! Hardness level is adjusted to level 4 as a factory setting.

• Turn the machine on.

• Press and hold the Start/Pause-button for 5 seconds to enter the mode for setting the salt consumption. This must be set within

60 seconds after turning the machine on.

• Set the level of water hardness by pressing the Start/Pause-button repeatedly. Use the table of water hardness level settings

on the next page.

• After adjusting the level of water hardness, press the On/Off button to confirm and store the setting.

Table of water hardness level settings

Water

German

French

hardness

level

°dH

°fH

0-5

6-11

12-17

18-22

23-34

35-55

•

English

British

Program indicator

hardness

hardness level

°Clark

0-9

0-6

● indicator light RINSE on

10-20

7-14

● indicator light FAST 90 MIN on

21-30

15-21

● indicator light FAST 90 MIN on

● indicator light RINSE on

31-40

22-28

● indicator light DELICATE on

41-60

29-42

● indicator light DELICATE on

● indicator light RINSE on

61-98

43-69

● indicator light DELICATE on

● indicator light FAST 90 MIN on

Salt consumption

(gram/cycle)