Brother MFC-J6510DW Panduan Pengaturan Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Semua dalam Satu Printer Brother MFC-J6510DW. Brother MFC-J6510DW 39 halaman. Quick setup guide - spanish
Juga untuk Brother MFC-J6510DW: Spesifikasi (2 halaman), Panduan Pengaturan Cepat (41 halaman), Petunjuk Manual (17 halaman), (Bahasa Inggris) Panduan Konfigurasi Cepat (41 halaman)

Gently adjust the paper side guides to the

paper with both hands. Make sure that the

paper side guides touch the edges of the

paper.

Close the output paper tray cover. Check that

the paper is flat in the tray and below the

maximum paper mark a.

Slowly push the paper tray completely into the

machine.

While holding the paper tray in place, pull out

the paper support a until it clicks, and then

unfold the paper support flap b.

Note

(For MFC-J6710DW)

For information about tray #2 (the lower tray), see

Loading paper in paper tray #2 in chapter 2 of the

Basic User's Guide.

2 2

1 1

Connect the power cord

and telephone line

IMPORTANT

DO NOT connect the USB cable yet (if you are

using a USB cable).

Connect the power cord.

WARNING

The machine must be fitted with an earthed

plug.

Connect the telephone line cord. Connect one

end of the telephone line cord to the socket on

the machine marked LINE and the other end to

a telephone wall socket.

WARNING

Since the machine is grounded through the

power outlet, you can protect yourself from

potentially hazardous electrical conditions on

the telephone network by keeping the power

cord connected to your machine when you

connect it to a telephone line. Similarly, you

can protect yourself when you want to move

your machine by disconnecting the telephone

line first and then the power cord.