AEG 35941G Panduan Petunjuk Pengoperasian - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Kompor AEG 35941G. AEG 35941G 20 halaman. Gas hob
Juga untuk AEG 35941G: Petunjuk Pengoperasian dan Pemasangan (26 halaman), Panduan Pengoperasian dan Instalasi (26 halaman), Petunjuk Pengoperasian dan Pemasangan (26 halaman), Petunjuk Pengoperasian dan Pemasangan (26 halaman), Petunjuk Pengoperasian dan Pemasangan (27 halaman)

Gas connection

Choose fixed connections or use a flexible pipe in stainless steel in compliance

with the regulation in force.If using flexible metallic pipes, be careful they do

not come in contact with mobile parts or they are not squeezed. Use the same

attention when the hob is combinated with an oven.

IMPORTANT - To ensure a correct operation, a saving of energy and the long-

life of the appliance, the voltage pressure of the appliance must correspond to

the recommended values. The adjustable connection is fixed to the

comprehensiveramp by means of a threaded nut G 1/2".

Interpose the sealing between the components as shown in the diagram.

Screw the parts without forcing, adjust the connection in the required direction

and tighten everything. The adjustable connection allows the feeding pipe to be

situated in the site purposefully allocated on the side of the protection box of

the hob itself (see diagram). This connection allows the overall dimensions of the

hob plus the feeding to be contained into a depth of 30 mm.

The appliance, before leaving the factory, has been tested in order to give you

the best results.

IMPORTANT - When the final connection has been made, it is essential that a

thorough leak test is carried out on the hob and installation.

Use some soapy water, never a flame.

FO 0264

FO 0265

A) Ramp with ending nut

B) Seal

C) Adjustable connection

A) Ramp ending with nut

B) Adjustable connection

C) Rigid or flexible metallic

gas pipe