AEG 35941G Petunjuk Pengoperasian dan Pemasangan - Halaman 16

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Kompor AEG 35941G. AEG 35941G 27 halaman. Gas hob
Juga untuk AEG 35941G: Petunjuk Pengoperasian dan Pemasangan (26 halaman), Panduan Pengoperasian dan Instalasi (26 halaman), Panduan Petunjuk Pengoperasian (20 halaman), Petunjuk Pengoperasian dan Pemasangan (26 halaman), Petunjuk Pengoperasian dan Pemasangan (26 halaman)

Installation

On the end of the shaft, which includes the G 1/2" threaded elbow,

adjustment is fixed so that the washer is fitted between the components

as shown in the diagram. Screw the parts together without using

excessive force.

Gas Connection

Connection to the gas supply should be with either rigid or semi-rigid

pipe, i.e. steel or copper.

The connection should be suitable for connecting to RC 1/2 (1/2 BSP

male thread).

When the final connection has been made, it is essential that a thorough

leak test is carried out on the hob and installation.

Ensure that the main connection pipe does not exert any strain on the

hob.

It is important to install the elbow correctly, with the shoulder on

the end of the thread, fitted to the hob connecting pipe.

Failure to ensure the correct assembly will cause leakage of gas.

FO 0264

A) End of shaft with nut

B) Washer

C) Elbow

FO 0814