AEG 6100 M-IN Panduan Petunjuk Pemasangan dan Pengoperasian - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pengoperasian untuk Kompor AEG 6100 M-IN. AEG 6100 M-IN 20 halaman. Ceramic hob

• In order to facilitate access if servicing is required, there must be a

space the size of the cut-out section in the worktop and 150mm high

under the hob. Anything installed in this area, e.g. anti-shock protec-

tion, must be easily removable.

Sticking the seal in the rabbet

• Clean the rabbet in the work surface.

• Stick the one-sided self-adhesive sealing tape supplied onto the up-

per surface of the rabbet along the edges of the cut-out section.

– Cut the sealing tape into four pieces relating to the length of the

edges of the rabbet.

– For the four corners of the rabbet the ends of the sealing tapes

must be cut into mitres. Do not stick the ends over one another.

– Stick the sealing tape flush into the corner of the rabbet, so that no

silicon compound can get under the glass ceramic when grouting.

– Don't stretch the tapes when sticking them on.