2N Lift1 Compact Panduan Singkat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Singkat untuk Sistem interkom 2N Lift1 Compact. 2N Lift1 Compact 12 halaman. For lifts
Juga untuk 2N Lift1 Compact: Panduan Singkat (12 halaman)

Halaman Cetak

Sortiment

Part No.

919640xx

919618xx

Extending modules

Part No.

913648E

919649E

919650E

919621E

919680E

Description

Lift1 (hereinafter referred to as Lift1) is designed for calling to predefined phone numbers. It

is usually used for emergency call from lift to the control centre or to the person who takes care

of the lift. A PSTN or alternative (PBX, GSM gateway) line is used for connection with the control

centre.

The basic version is dedicated for mounting behind the lift panel, there must be welded screws or

holes for mounting. The speaker, microphone and indicating LEDs can be mounted to the front

panel of the device or can be delivered separately with cables to be mounted anywhere on the lift

panel according the design (cable version). Model with the cover panel includes the front, visible

cover, this cover overlaps borders of the mounting hole. It doesn't need exact mounting holes and

the design of the space for speaker and microphone is solved.

For mounting on the top of the cabin surface is designated the 2N

robust metal cover, which includes all parts needed for function including the alarm button. The

description is not part of this manual, for information contact the producer.

Operation

Press the ALARM button to activate connection. The "Wait" pictogram goes on immediately and

the "Connection established" symbol goes out when communication has been set up. You can use

automatic dialing of up to six pre-programmed numbers. Communication is accompanied by

factory announcements and/or user recorded lift ID messages.

Service and Operating Staff Instructions

In the Automatic Dialing with Confirmation mode – default settings:

DTMF charter:

Function

Confirm to Lift1 that the call was successful. Lift1 shows the

connection by appropriate pictogram, mutes the currently played

announcement and allows the call till time limit is exhausted.

Mute the actual automatic announcement.

Description

Basic model for mounting below the panel

Model with the front panel

Description

Universal switch – remotely controlled switch by

DTMF, one switch or lift blocking module can be used.

Lift blocking module – blocks the lift function during

telephone line failures.

Amplifier module – for increasing volume in noisy

environment

Induction loop – for persons with hearing aid,

includes a self-adhesive holder and 1 m cable.

Programming tool – interconnects Lift1 with the

Service Tool on the PC for programming.

Lift1 Compact version, in