Brother MFC-T910DW Panduan Referensi - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Referensi untuk Semua dalam Satu Printer Brother MFC-T910DW. Brother MFC-T910DW 29 halaman. Brief explanations for routine operations
Juga untuk Brother MFC-T910DW: Panduan Keamanan Produk (24 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Referensi (30 halaman)
Halaman Cetak
5
Scan
Before Scanning
Before attempting to scan, confirm the
following:
• Make sure you have installed the Brother
software and drivers.
• Make sure the USB or network cable is
connected correctly, or that you are
connected to the network using your
wireless access point/router.
Scan from Your
Computer
There are several ways you can use your
computer to scan photos and documents on
your Brother machine. Use the software
applications provided by Brother, or use your
favorite scanning application.
For more detailed information, see the Online
User's Guide: Scan from Your Computer
®
(Windows
) or Scan from Your Computer
(Mac).
Scan Using the Scan
Button on the Machine
1
Load your document.
2
Press
(ESCÁNER (SCAN)).
3
Press a or b to select the [to PC]
option, and then press OK.
4
Press a or b to select the [to File]
option, and then press OK.
5
If the machine is connected over the
network, press a or b to select the
computer where you want to send data,
and then press OK.
If the LCD prompts you to enter a PIN,
use the control panel to enter the four-
digit PIN for the computer, and then press
OK.
6
Do one of the following:
• To change the settings, go to the next
step.
• To use the default settings, press
Inicio Negro (Black Start) or Inicio
Color (Color Start).
[Scan Type] depends on the default
settings. Pressing Inicio Negro (Black
Start) or Inicio Color (Color Start) does
not allow you to change the settings.
7
Press a or b to select the [Scan
Settings] setting, and then press OK.
To use the [Scan Settings] option, a
computer with either ControlCenter4
®
(Windows
) or Brother iPrint&Scan (Mac)
software installed must be connected to
the machine.
8
Press a or b to select the [Set at
Device] setting, and then press OK.
9
Select the scan settings you want to
change, and then press OK.
• [Scan Type]
Select the scan type for your
document.
• [Resolution]
Select the scan resolution for your
document.
• [File Type]
10