AEG 64130 K-MN Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kompor AEG 64130 K-MN. AEG 64130 K-MN 20 halaman. Ceramic glass hob

Halaman Cetak

What to do if ...

The cooking zones will not

switch on or are not function-

ing

Acoustic signal sounds when

appliance is switched off

The residual heat indicator is

not displaying anything

Acoustic signal sounds and

appliance switches itself on

and then off again; after 5

seconds another acoustic sig-

nal sounds

is lit

and number are displayed

If you are unable to remedy the problem by following the above suggestions,

please contact your local Service Force Centre.

Warning! Repairs to the appliance are only to be carried out by qualified service engi-

neers. Considerable danger to the user may result from improper repairs.

If the appliance has been operated incorrectly, the engineer's visit will be chargeable,

even during the warranty period.

Problem

More than 10 seconds have

passed since the appliance was

switched on

The child safety device is

switched on

Several sensor fields were

touched at the same time

Automatic switch off has been

triggered

The control panel is wholly or

partly covered by objects.

The cooking zone was only on

for a short time and is there-

fore not hot

The On/Off sensor field has

been covered up, e.g. by a

cloth

Overheating protection for the

cooking zone has been trig-

gered

Automatic switch off has been

triggered

Electronics fault

Possible cause

Remedy

Switch the appliance on again.

Deactivate the child safety de-

vice (See the section "Child

safety device")

Only touch one sensor field

Remove any objects (pan,

cloths, etc.) that are lying on

the control panel. Switch the

appliance on again

Remove objects.

If the cooking zone is sup-

posed to be hot, call the Cus-

tomer Service Department.

Do not place any objects on

the control panel

Switch off the cooking zone.

Switch the cooking zone on

again

Switch off the cooking zone.

Switch the cooking zone on

again

Disconnect the appliance from

the electrical supply for a few

minutes (Take the fuse out of

the house's wiring system)

If after switching on again,

is displayed again, call the cus-

tomer service department