Brother 1470N - HL B/W Laser Printer Panduan Pengaturan Jaringan Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengaturan Jaringan Cepat untuk Printer Brother 1470N - HL B/W Laser Printer. Brother 1470N - HL B/W Laser Printer 2 halaman. Setup guide - french
Juga untuk Brother 1470N - HL B/W Laser Printer: Panduan Pengaturan Cepat (2 halaman), Spesifikasi (2 halaman), Konfigurasi (Prancis) (2 halaman)
Halaman Cetak
1470NQNSG_BACK_Eng
K
PANTONE285
Installing the Driver for Network
Users
Before you continue, please ensure that the administrator has configured the
network printer settings correctly.
Follow the steps in the Quick Setup Guide
before proceeding.
Windows
®
For
users only
Step 4 Connect the printer to Your Network
& Install the driver
Click the "Connect the
Select the Network cable.
1
2
interface cable & install the
driver / utilities."
Hub
I
O
ON OFF
4
Connect the cable to your printer, and
5
Turn on the printer
then connect it to a free port on your
power switch.
hub.
Click the Next button.
Select the "Network Shared
7
8
Printer" or the "Brother Peer-
to-Peer Network Printer," and
then click the Next button.
Macintosh
®
For
users only
Step 4 Connect the printer to your Macintosh
Click the "Connect the
Select the Network cable.
1
2
interface cable & install the
driver / utilities."
Network shared
For
Step 5 Select the appropriate printer Queue or 'Sharename'
1
Select your printer's queue, and then click the OK button.
Peer-to-Peer
For Brother
Step 5 Configuring the LPR port
®
For Windows
95/98/Me users only
I
O
ON OFF
1
Select "LPR (Recommended)",
and then click the Next button.
Turn off the printer power
3
switch.
3
Specify the printer's IP
Address (or click the Browse
button to see a list of
printers), and then click the
OK button.
6
Follow the instructions on
the screen.
Peer-to-Peer
For Brother
Step 5 Configuring the NetBIOS port
Select the Network
connection style, and
then go to Step 5.
You can refer to the figure "Type
of Network Printer" on the reverse
side of this sheet.
Select NetBIOS, and then click the
1
Next button.
®
& Install the BR-Script PPD file
Hub
I
O
ON OFF
Turn off the
Connect the cable to your printer, and
3
4
printer power
then connect it to a free port on your hub.
switch.
printer users
2
Once the appropriate queue is specified, the printer driver will be installed.
(LPR
network printer users
- Recommended Peer-to-Peer printing method
®
For Windows NT
4.0 users only
2
Enter a unique port name
Select "LPR
1
(ex. BLP1), and then click
(Recommended)", and
the OK button.
then click the Next button.
4
Click the Finish button and
2
Enter the printer's IP
restart your PC.
Address and the queue
After your PC has
name BINARY_P1,
restarted, setup will be
then click the OK button.
complete.
(NetBIOS)
network printer users
Enter a unique port name (ex. BNT1),
Enter the path name (or click the Browse... button to
2
3
and then click the OK button.
see a list of printer's), and then click the OK button.
I
O
ON OFF
Turn on the
Follow the instructions on
Open the Chooser from the Apple
5
6
7
printer power
the screen.
menu on the Macintosh
switch.
The setup is now complete.
)
®
For Windows
2000 users only
Note: If this screen appears, insert
Select "LPR
1
®
the Windows NT
4.0 CD-ROM into
(Recommended)", and then
your CD-ROM drive.
click the Next button.
3
Click the Finish button and restart
3
Enter the printer's IP
your PC.
Address and a unique port
After your PC has restarted,
name, then click the Next
setup will be complete.
button.
Click the Finish button and restart your PC.
4
After your PC has restarted, setup will be complete.
®
*
2 If the Apple
LaserWriter8 Driver is not installed on your system, you can download it from http://www.apple.com.
Note: In the Chooser
you will see the name
BRN_xxxxxx_P1_AT,
where "xxxxxx" is the
last six digits of the
Ethernet address.
See Chapter 7 of the
Network User's Guide
*
2
®
Click the LaserWriter8
icon.
8
for more information.
®
.
(Select the zone you want to
®
use from the AppleTalk
zones
list.)
2
Click the Next button.
4
Click the Finish button and restart your PC.
After your PC has restarted, setup will
be complete.
Select the appropriate print
9
server, and then click the
Create button.
The setup is now complete.