AEG 67670 KF-N Panduan Petunjuk Pemasangan dan Pengoperasian - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pengoperasian untuk Kompor AEG 67670 KF-N. AEG 67670 KF-N 36 halaman. Ceramic glass induction hob
Juga untuk AEG 67670 KF-N: Panduan Petunjuk Pemasangan dan Pengoperasian (36 halaman)
Halaman Cetak
Switching the STOP+GO function on and off
The STOP+GO function simultaneously switches all cooking zones that
are switched on to the keep warm setting and then back to the heat
setting that was previously set. This function can be used to briefly in-
terrupt and then continue the cooking process e.g. to take a telephone
call.
To switch
on
To switch
off
3
Timer functions are not stopped by STOP+GO.
3
STOP+GO locks the whole control panel except the sensor field
Using the automatic warm-up function
All cooking zones are equipped with an automatic warm-up function.
The automatic warm-up function sets the cooking zone to the highest
setting for a certain period of time and then automatically switches
back to the cooking setting that was originally set.
Step
1.
2.
3.
4.
3
If during the automatic warm up
e.g. from
10
Control panel
Touch STOP+GO
Touch STOP+GO
Control panel
Setting the level
Place to one side for a moment
touch
touch in order to set the de-
sired cooking setting
to
, the automatic warm up is adjusted.
Display
heat setting that was previ-
ously set (not automatic
warm up function)
Display
/
after 3 seconds
a higher heat setting is selected,
.
/
/
until
/