Brother DCP-130C Panduan Pengguna - Halaman 38
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Printer Brother DCP-130C. Brother DCP-130C 47 halaman. Windows vista
Juga untuk Brother DCP-130C: Lembar Spesifikasi (2 halaman), Panduan Pengaturan Cepat (22 halaman), Panduan Pengaturan Cepat (22 halaman), Setup Manual (23 halaman), Panduan Pengaturan Cepat (24 halaman), Panduan Pengaturan Cepat (15 halaman)
Halaman Cetak
Checking the print quality
a
Press Ink Management.
b
Press a or b to choose Test Print.
Press OK.
c
Press a or b to choose
Print Quality.
Press OK.
d
Press Colour Start.
The machine begins printing the Print
Quality Check Sheet.
e
Check the quality of the four colour
blocks on the sheet.
Is Quality OK?
aYes bNo
f
Do one of the following:
If all lines are clear and visible, press
a to choose Yes, and go to step j.
If you can see missing short lines as
shown below, press b to choose No.
OK
g
The LCD asks you if the print quality is
OK for black and three colours.
Black OK?
aYes bNo
Press a (Yes) or b (No).
h
The LCD asks you if you want to start
cleaning.
Start Cleaning?
aYes bNo
Press a (Yes).
34
Poor
The machine starts cleaning the print
B
head.
i
After cleaning is finished, press Colour
Start.
The machine starts printing the Print
Quality Check Sheet again and then
return to step e.
j
Press Stop/Exit.
If you repeat this procedure at least five
times and the print quality is still poor,
replace the ink cartridge for the clogged
colour.
After replacing the ink cartridge, check
the print quality. If the problem still
exists, repeat the cleaning and test print
procedures at least five times for the
new ink cartridge. If ink is still missing,
call your Brother dealer.
CAUTION
DO NOT touch the print head. Touching the
print head may cause permanent damage
and may void the print head's warranty.
Note
When a print head
nozzle is clogged
the printed
sample looks like
this.
i
After the print
head nozzle is
cleaned, the
horizontal lines
are gone.