Brother DCP-7060D Panduan Pengaturan Cepat - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Printer Brother DCP-7060D. Brother DCP-7060D 20 halaman. Printers
Juga untuk Brother DCP-7060D: Panduan Pengguna Tingkat Lanjut (33 halaman), Panduan Pengaturan Cepat (20 halaman), Panduan Pengguna Tingkat Lanjut (24 halaman), Panduan Pengaturan Cepat (15 halaman), Panduan Pengguna Dasar (5 halaman)

Halaman Cetak
Brother DCP-7060D Panduan Pengaturan Cepat
Wired Network
For Wired Network Interface Users (DCP-7065DN only)
(Mac OS X 10.4.11 - 10.6.x)
8
Before you install
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
IMPORTANT
For Mac OS X 10.4.10 users, upgrade to
Mac OS X 10.4.11 - 10.6.x. (For the latest
drivers and information on the Mac OS X you
are using, visit http://solutions.brother.com/.)
b
Remove the protective cap from the LAN
connector marked with a
c
Connect the network interface cable to the LAN
connector and then connect it to a free port on
your hub.
d
Make sure your machine's power switch is on.
14
a
b
symbol.
It may take a few minutes for installation to
complete.
c
If your machine is not found over the network,
confirm your network settings.
Macintosh
9
Install MFL-Pro Suite
Put the installation CD-ROM into your
CD-ROM drive.
Double-click the Start Here OSX icon. Follow
the on-screen instructions.
Note
Follow the on-screen instructions until this
screen appears. Choose your machine from
the list, and then click OK.
Note