AEG 88101 Panduan Servis - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Servis untuk Kompor AEG 88101. AEG 88101 22 halaman. Induction hobs

599 519 523 EN

1 General Information

These instructions serve the repairing of autarkic cooking hobs and cooking hobs in combination with

an oven with 3 or 4 inductions cooking zones respectively of the type E.G.O.. Also includes hobs with

2 induction zones (Domino, Mixed, Mixed gas) and the Frontline appliance series.

Please search for the corresponding alarm

symptom and then go through the alarm remedy measures from top to bottom.

Information concerning the replacement of parts is to be found in the corresponding replacement

instructions or are included with the spare parts.

All work is only to be carried out on the induction modules and the heating elements are only to be

carried out after they have been disconnected.

A leak current of 5mA is normal and is therefore much higher than with other appliances.

The Standby power consumption amounts to < 1W (Induction plus user interface in the autonomous,

exception Frontline up to 2W).

The µprocessor for the measuring of the coil temperature is deactivated in standby, i.e. should the

cooking hob be heated up to hot pan being on the zone, no heating display "H" is displayed when

switched off.

In this condition, the ventilator is also not switched on by external heating.

DGS-TDS

21.04.08