Brother DCP-J752DW Panduan Pengaturan Cepat - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Printer Brother DCP-J752DW. Brother DCP-J752DW 23 halaman. Printers
Juga untuk Brother DCP-J752DW: Manual Cetak Udara (12 halaman), Panduan Pengaturan Cepat (31 halaman), Panduan Keamanan Produk (16 halaman)

Halaman Cetak

Brother DCP-J752DW Panduan Pengaturan Cepat

For Wireless Network Users

For wireless network interface users

Before you begin

NOTE

If you have previously configured the wireless settings of the machine, you must reset the network settings

before you can configure the wireless settings again.

On your machine, press

Press a or b to display Network. Press Network.

Press a or b to display Network Reset. Press Network Reset.

Press Yes to accept. Hold down Yes for two seconds to confirm.

NOTE

To set up your machine in Ad-hoc mode (connected to a wireless-capable computer without an access

point/router), see instructions in the Software and Network User's Guide on the CD-ROM.

To view the Software and Network User's Guide:

1 Turn on your computer. Insert the CD-ROM into your CD-ROM drive.

For Windows

2 Choose your model and the language. The CD-ROM top menu will appear.

3 Click User's Guides, and then click PDF/HTML documents.

4 Click Software and Network User's Guide.

For Macintosh:

2 Double-click User's Guides. Choose your model and the language.

3 Click User's Guides, and then click Software and Network User's Guide.

Choose your wireless setup method

The following instructions will offer three methods for setting up your Brother machine on a wireless network.

Choose the method you prefer for your environment.

Method a is the recommended way to connect (Windows

Setup using the CD-ROM (Windows

• It is recommended that you use a computer wirelessly connected to your network for this method.

• A USB cable might be needed in some cases.

Now go to

(Settings). Press All Settings.

and Macintosh)

or Macintosh).

page 13