Brother DCP-J772DW Manual - Halaman 16

Jelajahi secara online atau unduh pdf Manual untuk Printer Brother DCP-J772DW. Brother DCP-J772DW 31 halaman. Brief explanations for routine operations
Juga untuk Brother DCP-J772DW: Manual (19 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Keamanan Produk (21 halaman)

Halaman Cetak

Fax

Before Faxing

Telephone Line Interference/

VoIP

Related Models:

MFC-J890DW/MFC-J895DW

If you are having problems sending or

receiving a fax due to possible interference on

the telephone line or if you are using a VoIP

system, we recommend changing the modem

speed to minimise errors in fax operations.

Press

[Settings] > [All

Settings] > [Initial Setup] >

[Compatibility].

Press the option you want.

• [Basic(for VoIP)] reduces the

modem speed to 9,600 bps and turns

off colour fax receiving and ECM,

except for colour fax-sending. Unless

interference is a recurring problem on

your telephone line, you may prefer

to use it only when needed.

To improve compatibility with most

VoIP services, Brother recommends

changing the compatibility setting to

[Basic(for VoIP)].

• [Normal] sets the modem speed at

14,400 bps.

Press

• VoIP (Voice over IP) is a type of phone

system that uses an Internet

connection, rather than a traditional

phone line.

Send a Fax

Related Models:

MFC-J890DW/MFC-J895DW

Load your document in the ADF or place

it on the scanner glass.

Press

[Fax].

If [Fax Preview] is set to [On], press

[Fax] > [Sending Faxes].

The touchscreen displays:

Enter the fax number in one of the

following ways:

• Dial Pad (Enter the fax number

manually.)

Press all digits of the number using

the touchscreen.

• [Call History]

Press [Redial], [Outgoing

Call] or [Caller ID History].

If you select [Outgoing Call] or

[Caller ID History], select the

number you want, and then press

[Apply].

• [Address Book]

Press [Address Book].