Brother DCP-T310 Panduan Referensi - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Referensi untuk Printer Brother DCP-T310. Brother DCP-T310 28 halaman.
Juga untuk Brother DCP-T310: Panduan Keamanan Produk (24 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Pengaturan Cepat (2 halaman)

Halaman Cetak

Fax

Before Faxing

Telephone Line Interference/

VoIP

Related Models:

MFC-T810W

If you are having problems sending or

receiving a fax due to possible interference on

the telephone line or if you are using a VoIP

system, we recommend changing the modem

speed to minimise errors in fax operations.

Press Menu.

Press a or b to select the following:

a. Select [Initial Setup].

Press OK.

b. Select [Compatibility].

Press OK.

c. Select [Normal] or [Basic(for

VoIP)]. Press OK.

• [Basic(for VoIP)] reduces

the modem speed to 9,600 bps

and turns off colour fax receiving

and Error Correction Mode

(ECM), except for colour fax-

sending. Unless interference is a

recurring problem on your

telephone line, you may prefer to

use it only when needed.

To improve compatibility with

most VoIP services, Brother

recommends changing the

compatibility setting to

[Basic(for VoIP)].

• [Normal] sets the modem

speed at 14,400 bps.

Press Stop/Exit.

• VoIP (Voice over IP) is a type of phone

system that uses an Internet

connection, rather than a traditional

phone line.

• Brother does not recommend the use

of a VoIP line. VoIP limitations in

general can cause some functions of

the fax machine not to work correctly.

Send a Fax

Related Models:

MFC-T810W

NOTE

This feature is available only for monochrome

faxes.

Load your document in the ADF or place

it on the scanner glass.

Press

(FAX).

Enter the fax number in one of the

following ways:

• Dial Pad (Enter the fax number

manually.)

Press all digits of the number using

the dial pad.

• Outgoing call (Select a number from

the Outgoing Call history.)

a. Press Redial/Pause on the

control panel.

b. Press a or b to select [Outgoing

Call]. Press OK.

c. Select the number you want, and

then press OK.

• Caller ID (Select a number from the

Caller ID history.)