Brother GT-3 Series Panduan Pemeliharaan - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pemeliharaan untuk Printer Brother GT-3 Series. Brother GT-3 Series 17 halaman. Cookbook maintenance
Juga untuk Brother GT-3 Series: Panduan Pemeliharaan (16 halaman), Buku Petunjuk (15 halaman), Buku Petunjuk (12 halaman), Buku Petunjuk (18 halaman), Panduan Referensi (8 halaman), Panduan Referensi (8 halaman), Manual (3 halaman), Memasang (4 halaman)

Shaking White Ink

The White ink contains titanium dioxide which helps provide vibrancy.

This will separate after being stationary for more than eighteen hours.

Dull prints will result if the ink is not agitated before use.

Shake the white ink cartridges side to side and tip end over end for 45 seconds.

> No matter if you will have to do the

Daily Cleaning White

If the printer has

day before...

minimum

If the printer has

18H

White Agitation

If the printer has printed with white ink a minimum of 15 T-shirts the day

before...

minimum

If the printer has printed with white ink within the last eighteen hours...

18H

> TIP

NZC

PHC

DCW

not

printed with white ink a minimum of 15 T-shirts the

not

printed with white ink within the last eighteen hours

Then the

After performing the daily maintenance on the white ink,

a nozzle check should be printed

, you must

must be performed after the

DCW

could be performed after the

DAILY MAINTENANCE

SWI

BEFORE !

SWI

minimum