Brother GTX Series Panduan Referensi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Referensi untuk Printer Brother GTX Series. Brother GTX Series 13 halaman.
Juga untuk Brother GTX Series: Panduan Referensi (13 halaman)

Halaman Cetak

1. Daily Maintenance

ADDITIONAL WEEKLY MAINTENANCE

Visual inspection is important to keep your printer up and

running. Verify all the moving parts of the machine and also

check for leakage of ink.

Please follow also all the instructions that could appear on

the display of the printer!

When you see a yellow number push the

what you have to do to erase the Error/Warning message.

INTERNAL CLEANING OF PRINTER

If the inside of your printer is covered with INK MIST, perform a thorough CLEANING

CLEAN

> Always use this menu to perform cleanings or replace parts:

Maintenance

• Remove 3 Screws to remove the Encoder Cover.

• With the Clean Stick R dipped in Cleaning Solution,

wipe away the stains on the 4 Carriage Rollers

[There is 1 more Roller hidden just below the Roller 1 ]

• Move the carriage from side to side to wipe all around

the 4 rollers completely.

• Clean the Carriage Guide Shaft and the 3 sides

[upper, front, and lower]

moisten with a small amount of Isopropyl Alcohol [95°]

• Do not use alcohol on other parts than the carriage

guide shaft and the roller guide!

• Apply a proper amount of Molykote 30 Grease onto

the Carriage Guide Shaft only

• Remove 3 screws to take out the encoder metal cover.

With your non-fuzzy cloth moisten with Alcohol, clean

carefully both side of the Encoder Strip

• Perform a CR Speed Adjustment.

Printer Setting

GREASE

• Print out a Nozzle Check pattern and do a Nozzle

Cleaning if necessary.

Maintenance Part Clean/Replace

key to know

of Roller Guide with a non-fuzzy cloth

[never on the Roller Guide!]

CR Speed Adjustment

and follow instructions on the display

> OK