AEG C6410K Panduan Pengoperasian dan Instalasi - Halaman 25

Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Instalasi untuk Kompor AEG C6410K. AEG C6410K 36 halaman. Glass ceramic hob

What do I do if ...

It is possible that faults have been caused by a minor error, which you

can correct yourself with the help of the following instructions. Do not

attempt any further repairs if the following instructions do not help in

each specific case.

W arning! Repairs to the appliance are only to be carried out by ap-

proved service engineers. Improperly effected repairs may result in con-

siderable risk to the user. If your appliance needs repairing, please

contact your specialist dealer or customer service.

What to do if ...

.... the F 2 5 display lights up?

Your appliance has been wrongly

connected.

Disconnect the appliance from the

mains supply.

The mains connection must be re-

wired appropriately.

Contact a registered specialist to do

this.

... the cooking zones will not function?

Check, whether

– the mains fuse (in the household fuse box) is intact.

– the appliance is correctly switched on.

– the control lamps of the control panel are lighting.

– the appropriate cooking zone has been switched on.

– the cooking zones are set to the required setting to finish cooking

(see section "Cooking").

– the cooking zones have been switched off by the safety cutout (see

section "Safety Functions").

... cooking zones cannot be switched on?

Check, whether

– the control panel is locked (see section "Child-Safety Device").

– more than 10 seconds have elapsed between operating the On/Off

button and switching on the desired cooking zone (see section

"Switching on the appliance").

– the touch controls are entirely or partly covered by liquid or by a wet

cloth.

Operating Instructions