Brother HL-1000 Series Panduan Pengaturan Cepat - Halaman 29

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Printer Brother HL-1000 Series. Brother HL-1000 Series 42 halaman. Brother hl-1040: quick setup

Halaman Cetak

REPLACING THE DRUM UNIT

The printer uses a drum unit to create the print images on paper. If the Drum lamp is on, it

indicates the drum unit is nearly at the end of its life. We recommend you prepare a new drum

unit to replace the current one. Even if the Drum lamp is on, you may be able to continue to

print without replacing the drum unit for a while. If there is a noticeable deterioration in the

output print quality even before the Drum lamp lights, then the drum unit should be replaced.

Caution

When removing the drum unit, handle it carefully as it may contain toner.

You should clean the printer when you replace the drum unit.

Note

The drum unit is a consumable, and it is necessary to replace it periodically.

There are many factors that determine the actual drum life, such as temperature,

humidity, type of paper and toner that you use, the number of pages per print job, etc..

The drum life is estimated at approximately 20,000 pages at 20 pages per job and 8,000

pages at 1 page per job. The actual number of pages that your drum will print may be

significantly less than these estimates. Because we have no control over the many

factors that determine the actual drum life, we cannot guarantee a minimum number of

pages that will be printed by your drum.

For best performance, use only genuine Brother toner, and the product should only be

used in a clean, dust-free environment with adequate ventilation.

Follow these steps to replace the drum unit:

Open the top cover towards you. Remove

the drum unit by holding each side of the

drum and gently lifting the drum forwards

towards you.

Note

It is recommended to put the drum unit on a

piece of disposable paper or cloth in case of

accidental toner spill or scatter.

- 27 -