AEG CERAMIC HOB 6010 K Panduan Petunjuk Pemasangan dan Pengoperasian - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pengoperasian untuk Kompor AEG CERAMIC HOB 6010 K. AEG CERAMIC HOB 6010 K 22 halaman. Fitted glass ceramic cooking units
Juga untuk AEG CERAMIC HOB 6010 K: Panduan Petunjuk Pemasangan dan Pengoperasian (20 halaman), Panduan Petunjuk Pemasangan dan Pengoperasian (20 halaman), Panduan Petunjuk Pengoperasian (24 halaman), Petunjuk Pengoperasian dan Pemasangan (16 halaman), Petunjuk Pengoperasian dan Pemasangan (16 halaman)

WARNING!

Risk of injury from electrical current.

• The electrical mains terminal is live.

• Make electrical mains terminal free of voltage.

• Observe connection schematic.

• Observe electrical safety rules.

• Ensure anti-shock protection through correct installation by a quali-

fied electrician.

• The appliance must be connected to the electrical supply by a quali-

fied electrician.

IMPORTANT!

Risk of injury from electrical current.

Loose and inappropriate plug and socket connections can make the ter-

minal overheat.

• Have the clamping joints correctedly installed by a qualified electri-

cian.

• Use strain relief clamp on cable.

• In the event of single-phase or two-phase connection, the appropri-

ate mains cable of type H05BB-F Tmax 90° (or higher) must be used.

• If this appliance's mains cable is damaged, it must be replaced by a

special cable (type H05BB-F Tmax 90°; or higher). The latter is availa-

ble from the Customer Care Department.

A device must be provided in the electrical installation which allows the

appliance to be disconnected from the mains at all poles with a contact

opening width of at least 3 mm.

Suitable isolation devices include line protecting cut-outs, fuses (screw

type fuses are to be removed from the holder), earth leakage trips and

contactors.