AEG FM 7300G-AN Buku Instruksi - Halaman 9

Jelajahi secara online atau unduh pdf Buku Instruksi untuk Kompor AEG FM 7300G-AN. AEG FM 7300G-AN 16 halaman. Electrolux hob
Juga untuk AEG FM 7300G-AN: Buku Instruksi (32 halaman), Buku Instruksi (33 halaman)

Halaman Cetak

Mounting:

When mounting several hobs together you must use a reinforcement beam

between each hob as well as the silicone supplied with the hobs (see fig.)

1. Cut a hole of the calculated size in the table top

2. Place the individual hobs upside down on a mat. Take care that the top side is

not scratched.

3. Mount the clamping fittings in the holes in the side of the base panels (see

fig.)

4. Place the first hob in the hole.

5. Apply silicone to the two corners joining the next hob (see fig.)

Use only the silicone supplied with the hobs as this is intended to tolerate the

high temperatures of the appliance.

6. Push a reinforcement beam up against the hob. Apply silicone on the rein-

forcement beam (see fig.)

7. Tighten the clamping fittings to the table top using a screwdriver.

8. Repeat the process for the other hobs.

Silicone

Before Use

Protect the ceramic hob

Before using the product for the first

time, clean off any factory residues

such as dust or dirt. Give the ceramic

hob a protective coating before using

it. This will make it easier to clean the

hob and will prevent spills etc. burn-

ing on too hard.

This is what you do:

1. Remove the pan support(s), burner

ring and burner cover.

2. Sprinkle a few drops of a ceramic

cleaning agent onto a piece of

kitchen paper and rub into the

whole surface.

3. Polish the hob with a clean cloth

until dry.

Clean the burners

Wash the pan stands, burner covers

and burner rings in hot water and

washing-up liquid.