LG 19CNT42K-B Panduan Pemilik - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Monitor LG 19CNT42K-B. LG 19CNT42K-B 35 halaman. Cloud monitor
Halaman Cetak
Mounting on a table
1
Lift the monitor and place it on the table in an
upright position.
Install at least 10 cm away from the wall to
ensure sufficient ventilation.
10 cm
10 cm
2
Connect the adaptor to the monitor, then plug
the power cord into the wall outlet.
3
Press the
(Power) button on the front of the
monitor to turn on the monitor.
CAUTION
Unplug the power cord prior to moving or
y
installing the monitor. There is risk of electric
shock.
Adjusting the stand height
1
Place the monitor mounted on the stand base
in an upright position.
2
Remove the tape attached at the bottom rear
of the stand body, then pull out the locking
pin.
10 cm
10 cm
3
The height can be adjusted up to 130.0 mm.
Once the pin is removed, it is not necessary
y
to re-insert it to adjust the height.
ASSEMBLING AND PREPARING
Stand Body
Tape
CAUTION
WARNING
Do not put your fingers or
y
hand between the screen
and the base (chassis) when
adjusting the screen's height.
7
Locking Pin
130.0 mm