AEG IKE42640KB Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Kompor AEG IKE42640KB. AEG IKE42640KB 20 halaman.
Juga untuk AEG IKE42640KB: Panduan Pengguna (40 halaman)

Halaman Cetak

control bar and indicates the position of the

pot.

Each square on the control panel represents

one cooking zone on the induction cooking

surface. Zone indicators show which cooking

zone is controlled by the appropriate control

bar.

5.4 Heat setting

Touch the control bar at the desired heat

setting or move your finger along the control

bar to set or change the heat setting for a

cooking zone.

Once you place a pot on the cooking zone

and set the heat setting, it remains the same

for 2 minutes after you remove the pot. The

control bar and the cooking zone indicator

blink for 2 minutes. If you place the pot on

the cooking zone again within this time, the

heat setting reactivates. Otherwise the

cooking zone deactivates.

5.5 OptiHeat Control (3 step

Residual heat indicator)

WARNING!

As long as the

indicator is on, there is a risk of

burns from residual heat.

The induction cooking zones produce the

heat necessary for the cooking process

directly in the bottom of the cookware. The

glass ceramic is heated by the heat of the

cookware.

The indicators

cooking zone is hot. They show the level of

the residual heat for the cooking zones you

are currently using.

The indicator may also appear:

• for the neighbouring cooking zones even

if you are not using them,

• when hot cookware is placed on cold

cooking zone,

ENGLISH

appear when a

• when the hob is deactivated but the

cooking zone is still hot.

The indicator disappears when the cooking

zone has cooled down.

5.6 Bridge

This function connects two cooking zones

and they operate as one. You can use the

function with large cookware.

1. Place the cookware on two cooking

zones. The cookware must cover the

centres of both zones.

turns white.

2. Touch

to activate the function.

3. Set the heat setting.

The cookware must cover the centres of both

zones but not go beyond the area marking.

To deactivate the function, touch

cooking zones operate independently.

5.7 PowerBoost

This function activates more power for the

appropriate induction cooking zone,

depending on the cookware size. The

function can be activated only for a limited

period of time.

Touch

to activate the function for the

cooking zone.

The symbol turns red.

The function deactivates automatically.

. The