AEG 7000 Series Panduan Pengguna - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin cuci AEG 7000 Series. AEG 7000 Series 44 halaman.
Juga untuk AEG 7000 Series: Panduan Pengguna (32 halaman), Panduan Pengguna (49 halaman), Panduan Pengguna (32 halaman), Panduan Pengguna (28 halaman), Panduan Pengguna (36 halaman)

Halaman Cetak

www.aeg.com

If you set a programme or an

option that ends with water

in the drum, the Stand-by

function doesn't deactivate

the appliance to remind you

to drain the water.

11. DAILY USE - WASHING & DRYING

WARNING!

Refer to Safety chapters.

This appliance is an

automatic washer dryer.

11.1 NON-STOP programme -

Wash and dry

Not all programmes are

compatible with drying

function. The NonStop

60min programme is already

a complete wash&dry

programme.

You can wash and dry your laundry

setting a «non stop-programme».

Proceed as follows:

1. Press the On/Off button for some

seconds to activate the appliance.

2. Load the laundry one item at a time.

3. Put the detergent and the additives

in the appropriate compartment.

4. Turn the programme dial to the

washing programme. The display

shows the default temperature and

spin. If necessary, change them

according to your laundry. The

display also shows the maximum

recommended load for washing

phase.

5. Set the desired options, if there are

available.

6. Touch the Mode button once to

activate also the drying function. The

Wash and Dry indicators come on.

The indicators

appear on the display. The display

also shows the maximum

recommended load for a washing

and drying programme (e.g. 4 kg for

cottons).

and

11.2 Washing and Drying -

Automatic levels

1. Tap on the Auto Drying button

repeatedly until the display shows

the required dryness level. The

indicators in the display illuminate

accordingly:

Iron dry: for cotton

items;

Cupboard dry: for

cotton and synthetic items;

Extra dry: for cotton

items.

The time value on the display is the

duration of both cycles washing and

drying, calculated on a default load

size.

To have a good drying by

using less energy and in a

shorter time, the appliance

does not let you set a too

low spin speed for the items

to be washed and dried.

2. Touch button Start/Pause to start the

programme. The PROSENSE

estimation starts.

In the display the door locked

indicator goes on, the indicator of the

running phase starts flashing.

The display also shows the remaining

programme time.

11.3 Washing and Timed

Drying

1. Tap on the button Time Drying

repeatedly to set the desired time

value (see the "Timed drying" table

the "Programmes" chapter). The