Fujitsu LIFBOOK U727 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Laptop Fujitsu LIFBOOK U727. Fujitsu LIFBOOK U727 46 halaman.

Halaman Cetak

AUSTRALIAN REGULATIONS

Important Health and Safety Information

This notebook complies withh the relevant safety

regulations for data processing equipment. If you

have questions about using your notebook in a

particular area, please contact your sales outlet or

our Hotline/Hlep Desk.

Additional safety notes for devices with

modem

WARNING

FOR SAFETY REASONS, ONLY CONNECT

EQUIPMENT WITH A TELECOMMUNICATIONS

COMPLIANCE LABEL. THIS INCLUDES

CUSTOMER EQUIPMENT PREVIOUSLY

LABELLED PERMITTED OR CERTIFIED.

Connection of Non Certified/ Approved

peripherals may result in the equipment

operating outisde the Australian EMI

Standards.

M o d e m s c o n n e c t e d t o t h e A u s t r a l i a n

telecommunications network must be operated

in accordance with the Labelling Notice. This

modem has benn specifically configured to

ensure compliance with the ACMA standards.

Do not adjust your modem or software outside

the values indicated below. To do so would

result in your modem being operated in a non-

compliant manner.

The unit shall be connected to Telecommunications

Network through a line cord, which meets the

requirements of ACMA AS/ ACIF S008:2006.

The equipment shall be powered through an

Australian Approved mains cord set. When the

Secondary Landscape Orientation of the Tablet

PC is held close to the body, the antenna must

be in closed condition to avoid physical damage

to the Antenna.

Call Attempts / Retries:

Applications software shall be configured so

that no more than 3 attempts are made to

establish a connection to a given number(Note:

if the modern can detect serice tones, up to 10

attempts can be made). If the call sequence is

unsuccessful, there shall be a delay of at least

30 minutes before attempting to call the number

again.

Failure to set the modem and any application

s o f t w a r e u s e d w i t h t h e m o d e m , t o t h e

values shown above will result in the modem

being operated in a non-compliant manner.

Consequently, this would be in violation of the

Labelling Notice for 1997 prescribes penalties

for the connection of non-complaint equipment.