AEG EWF 1245 Buklet Instruksi - Halaman 19

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Mesin cuci AEG EWF 1245. AEG EWF 1245 26 halaman.

Halaman Cetak

10. Start the programme

Press the START/PAUSE button. The relevant light

will stop flashing. The message relevant to the

phase that is in progress will be shown in the

display.

If you have chosen a delayed start, the washing

machine will begin the countdown.

START/PAUSE

11. How to change a programme during

its cycle

Before you make any change, you must pause the

washing machine by pressing the START/PAUSE

button.

It is possible to change any phase before the

programme carries it out.

When the programme has started, you can only

reset it by turning the programme selector dial to O

and then you can select the new programme. The

washing water remains in the tub. Start the new

programme by depressing the START/PAUSE

button.

Note: To drain the water before starting the new

cycle, you have to cancel the programme and select

the DRAIN cycle.

12. Cancelling a programme

Turn the selector dial to O to cancel a programme

which is running. Now you can select a new

programme.

13. How to open the door during the

cycle of a programme

You can open the door, after having set the washing

machine to PAUSE, provided the following

conditions exist:

the washing machine is not in the heating phase

beyond 55°C;

the level of the water is not high;

the drum is not turning.

All manuals and user guides at all-guides.com

COTTON

08.30

Washing

12.00

40°C

1200

Temp.

Spin

Exit

Options

Change

If these requirements are met, when you pause the

washing machine the door pilot light goes out, the

relevant message appears in the display and the

door can be opened.

Should it not be possible to open the door, and

should it be absolutely necessary to do so, switch

the machine off by turning the selector dial on "0"

position.

After approximately 3 minutes, you can open the

door.

Pay attention to the level and temperature of the

water in the washing machine!

14. End of programme

At the end of the programme, the washing machine

stops automatically, gives an audible signal (if

option no sound has not been selected), and

displays the relevant message.

If you had selected the RINSE HOLD or NIGHT

CYCLE option, the START/PAUSE button light is off.

The door pilot light remains lit and the message

"Door locked" appears in the display.

To drain or spin, first turn the programme selector

dial to O and then to drain programme

spin/delicate spin programme

Release of the lock is also indicated by the coming

on of the message "Door openable" (cycle ended).

Turn the programme selector dial to O to switch the

machine off.

Remove the laundry from the washing machine.

Check whether the drum is completely empty, by

rotating it with your hand. The purpose of this is to

prevent any items of laundry from remaining

accidentally in the drum, where they might get

damaged in a subsequent wash (e.g. by shrinking)

or bleed colour into another load of laundry.

We advise you to close the water supply tap and

disconnect the plug from the socket.

Leave the door ajar in order to air the washing

machine.