Brother P-Touch 1010 Panduan Pengguna

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Brother P-Touch 1010. Brother P-Touch 1010 2 halaman.
Juga untuk Brother P-Touch 1010: Manual (2 halaman)

Halaman Cetak

USER'S GUIDE

English

www.P-touch.com

Printed in China

LW2056001

INTRODUCTION

With your P-touch 1010, you can create labels for any application. Select from

the many frames, character sizes and styles to design beautiful custom la-

bels. In addition, the variety of tape cartridges available allows you to print la-

bels with different widths and exciting colors.

Read this manual carefully before starting and keep the manual in a handy

place for future reference.

WARNING

• Always use the specified voltage and the suggested AC adapter (AD-24) for this

machine to prevent any damage or failure.

• Unplug the power cord immediately and stop using the P-touch during an electrical

storm. There may be a remote risk of electric shock from lightning.

• Do not use the AC adapter in places of high humidity such as bathrooms.

• Do not overload the power cord.

• Do not place heavy objects on, or damage the power cord or plug. Do not forcibly bend

or pull the power cord. When disconnecting the power cord from the power outlet,

always hold the plug.

• To prevent fire or electric shock, make sure that the plug is fully inserted to the power

outlet. Do not use an outlet that is loose.

• Do not get the machine/AC adapter/power plug wet, such as by handling them with

wet hands or spilling beverages on to them.

• Do not disassemble or modify the machine/AC adapter/batteries.

• Disconnect the AC adapter, remove batteries and stop using immediately if you notice

any abnormal odour, heat, discolouration, deformation or anything unusual while in

use, or in storage.

• Do not use metallic articles, such as tweezers or a metallic pen, when exchanging the

batteries.

CAUTION

• To avoid injuries, do not touch the blade of the cutter unit or any metal parts near the

print head.

• Do not apply excessive pressure to the cutter lever.

• Remove the batteries and disconnect the AC adapter if you do not intend to use the

machine for an extended period of time. (Note: When power is disconnected for more

than two minutes, all text & formats in the display will be lost. Language, Unit and

Time/Date settings will also be cleared.)

• To avoid battery leakage or damage, make sure batteries are inserted correctly.

• To prevent damage or breakage, do not drop or hit the machine/AC adapter or press

on the LCD display.

• Depending on the location, material, and environmental conditions, the label may

unpeel or become irremovable, the color of the label may change or be transferred to

other objects. Before applying the label, check the environmental condition and the

material.

• Any data stored in memory may be lost due to failure or repair of the P-touch, or if the

battery expires.

General Precautions

• Do not use the P-touch in any way or for any purpose not described in this guide.

Doing so may result in accidents or damage to the machine.

• Use only Brother TZ tapes with this machine. Do not use tapes that do not have the

mark.

• Do not clean the machine with alcohol or other organic solvents. Only use a soft, dry

cloth.

• Do not touch the print head with your fingers. Use a soft wipe (e.g. a cotton swab)

when cleaning the print head.

• Do not put any foreign objects into the tape exit slot or AC adapter connector, etc.

• Do not place the P-touch in direct sunlight or rain, near heaters or other hot

appliances, dashboard or in the back of your car, in any location exposed to extremely

high or low temperatures, high humidity, or dusty locations. Standard operating

temperature range: 10°C to 35°C.

• Do not try to print labels using an empty tape cassette in the P-touch. Doing so will

damage the print head.

• Do not pull the tape being fed from the P-touch, otherwise the tape cassette or P-touch

may be damaged.

PREPARATION

Power Supply & Tape Cassettes

Open the tape compartment

Tape compartment

cover

cover by pressing in the rough

area at the top end of the

machine.

If a tape cassette is already

installed, remove it by pulling it

straight up. Also, if batteries are

already installed, remove them.

head

• Make sure that the power is

turned off when replacing

batteries or tape cassette.

Tape cutter lever

Insert six new AAA alkaline

batteries (LR03), making sure

that their poles point in the

correct directions. Always

replace all six batteries at the

same time using brand new

ones.

Insert a tape cassette, making

sure that it slots into place.

End of tape

Toothed Wheel

Cutter's edge

Tape guide

Tape exit slot

• Make sure that the end of the tape feeds under the tape guides.

• If the ink ribbon is loose, use your finger to wind the toothed wheel in the

direction of the arrow on the cassette.

• Use only Brother TZ tapes with this machine.

Securely close the back cover, making

sure that it slots into place.

After you have installed the tape, feed the

tape (see Feeding) once and then push in the

tape cutter lever to cut the tape.

When using optional AC adapter (AD-24)

Insert the plug on the adapter cord into

the adapter jack on the bottom end of

the machine.

Insert the plug into the nearest standard

electrical outlet.

For memory back up, we recommend using

AAA alkaline batteries (LR03) together with

the AC adapter.

OPERATION

Keyboard & LCD

Size

Width

Style

Cursor

Underline/Frame

Caps

Label Length

Time/Date key

Print key

Power key

Enter key

Cursor key

Backspace key

Clear key

Function key

Number key

Character key

Caps key

Accent key

Symbol key

Space key

The LCD shows one row of 12 characters; however, the text that you

enter can be up to 80 characters in length.

Initial Settings

Start your machine

Supply power by using six AAA alkaline batteries or the optional AC adapter, and

then press

Set the language (English/Español/Français/Hrvatski/Italiano/Magyar/

Nedrlnds/Norsk/Polski/Portug./Romana/Slovenski/Slovensky/Suomi/

Svenska/

/Dansk/Deutsch)

The default setting is "English".

[

Language

]

Choose a language with

and press

Set the unit (mm/inch)

The default setting is "mm".

Unit

[

]

Choose unit with

and press

Set Date (DD/MM/YY) and Time (hh:mm)

Example: setting the date and time to October 21st 2007, 10:30

TimeDate

[

]

[Clock]

Date (DD/MM/YY)

input "21"

input "10"

input "07"

Time (hh:mm)

input "10"

input "30"

You can also confirm the figure and move to the next setting by using the right

cursor key.

• The machine automatically turns off if no keys are pressed for 5

minutes.

• To cancel operations, press

• To reset the machine to default settings, turn off the machine and

then while holding down

and

, press

to turn the

machine back on. Finally, release

and

[GETTING STARTED]

REFERENCE

Troubleshooting

Error message

Message

Cause/Remedy

Battery

The batteries are weak. Replace them with new ones.

BATTERY!

The installed batteries are about to run out.

Invalid

• There is no text above the cursor when you set Numbering.

• Invalid character is selected for Numbering.

• Invalid number is selected for Tab Length or Label Length.

No Text

• You tried to print a text file with no data stored in the mem-

ory.

• The Print key was pressed when no text was entered.

• You tried to set Copies, Numbering, Mirror, or Text Preview

when no text was entered.

Line Lmt

• You tried to enter a 3rd line by pressing the Enter key.

• You tried to print a 2 line text with 3.5 mm or 6 mm tape

installed.

No Cassette

You tried to print a label with no cassette installed.

Cutter Error

Tape cutter lever was used in the middle of printing process.

Full

The maximum number of characters (80 characters) has

already been entered.

Text Lmt

The text length exceeds the selected label length or the

selected Auto Format setting length.

No Frame OK?

Printing on 3.5 mm tape with invalid Frame setting ON.

(Select

to print with no Frame,

to cancel.)

What to do when...

Problem

Solution

The display stays blank

• Check that the batteries are correctly inserted.

after you have turned on

• If the batteries are weak, replace them.

the machine.

• Check that the AD-24 adapter is correctly connected.

• See "[Margin] (Tape Margin)" in this users guide and select

When the label is

printed out, there is too

[Half] or [Narrow] to have smaller margins for your label.

much margin (space) on

both sides of the text.

The machine does not

• Check that the tape cassette has been inserted correctly.

print, or the printed

• If the tape cassette is empty, replace it.

characters are not

• Check the tape compartment cover is properly closed.

formed properly.

The setting has cleared

• The batteries may be weak. Replace them.

on its own.

• When power is disconnected for more than two minutes,

all text & formats in the display will be lost. Language, Unit

and Time/Date settings will also be cleared.

A blank horizontal line

• There maybe some dust on the print head. Remove the

appears through the

tape cassette and use a dry cotton swab to gently wipe the

printed label.

print head with an up-and-down motion.

The machine has

• Turn off the machine, and then while holding down

"locked up" (i.e., nothing

and

, press

to turn the machine back on.

happens when a key is

Finally, release

and

pressed, even though

• Note: The text and formats in the display are erased. Also,

the machine is on.)

the language, Unit and Time/Date settings will be cleared.

The power turns off

• The batteries may be weak. Replace them.

when you try to print.

• Check that the batteries are correctly inserted.

The tape does not feed

• Check that the end of the tape feeds under the tape guides.

properly or the tape gets

• The cutter lever was used while printing. Do not touch the

stuck inside the machine.

cutter lever during printing.

All text and format settings

• Press

and select [Txt&Format].

need to be cleared to

create a new label.

To change language

• See step 2 "Set the language" of the "Initial Settings".

setting.

Specifications

Item

Specification

107.4 mm (W) × 202.6 mm (D) × 56.6 mm (H)

Dimensions

Weight

365 g (without batteries and tape cassette)

Power supply

Six AAA alkaline batteries (LR03) or optional AC adapter

(AD-24)

Tape cassette

Brother TZ tape (width) :

3.5 mm, 6 mm, 9 mm, 12 mm

Accessories

(Supplies may differ by distribution.)

Accessories

Stock No.

Tape Cassettes

See the included "Tape Catalog".

AC Adapter

AD-24

Cutter Unit

TC-5 (replacement)

If the cutter blade becomes blunt and/or the cutter stopper wears out after

repetitive use, causing the cutter to not cut the tape cleanly, replace with a

new cutter unit (stock no. TC-5) which can be obtained from an authorised

Brother reseller.