AEG L 60260 TL Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin cuci AEG L 60260 TL. AEG L 60260 TL 32 halaman.
Juga untuk AEG L 60260 TL: Panduan Pengguna (28 halaman)
Halaman Cetak
www.aeg.com
8
The display shows:
A
• The programme time
• The delay start
• Alarm codes
• Err
•
B
C
START/PAUSE BUTTON
Press button
programme.
DELAY START BUTTON
Press button
programme from 30 minutes to 20 hours.
TIME SAVE BUTTON
Press the button
gramme duration.
• Press one time to set 'Shortened dura-
tion' for items with daily soil.
• Press two times to set 'Extra Quick' for
items with almost no soil.
Some programmes accept only
one of the two functions.
When the programme starts, the time decreases with steps of 1 minute.
When you press the delay start button, the display shows the delay start
time.
If the appliance has a malfunction, the display shows alarm codes. Refer
to 'Troubleshooting' chapter.
The display shows this message for some seconds if:
– You set a function that is not applicable for the programme.
– You change the programme while it operates.
The indicator of the Start/Pause button
When the programme is completed.
Door lock
You cannot open the appliance door when the symbol is on.
You can open the door only when the symbol goes off.
If the programme is completed but the symbol stays on:
• There is water in the drum.
• The 'Rinse Hold' function is on.
The child lock symbol
The symbol comes on when you activate this device.
to start or interrupt a
4
5
to delay the start of a
6
to decrease the pro-
4
EXTRA RINSE BUTTON
Press button
a programme.
Use this function for persons allergic to
detergents and in areas where the water
5
is soft.
SPIN BUTTON
Press this button to:
6
• Decrease the maximum speed of the
spin phase of the programme.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the water
when the programme is completed.
4
flashes.
to add rinsing phases to
7
8
'Rinse Hold' function is
on.
7