Fujitsu LifeBook C-6591 Panduan Bios - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Bios untuk Laptop Fujitsu LifeBook C-6591. Fujitsu LifeBook C-6591 40 halaman. Bios setup utility
Juga untuk Fujitsu LifeBook C-6591: Manual Perangkat Lunak (39 halaman)

Halaman Cetak

Primary Master Submenu of the Main Menu

The Primary Master submenu identifies what ATA

devices are installed.

Main

Type:

Maximum Capacity:

Multi-Sector Transfers:

LBA Mode Control:

PIO Transfer Mode:

DMA Transfer Mode:

Help

ESC

Exit

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field

Options

Type:

Auto

None

CD-ROM

Hard Disk

Cylinders:

A number

between 0

and 65,535

Heads:

A number

between 1

and 16

Sectors:

A number

between 0

and 63

PhoenixBIOS Setup Utility

Primary Master [HITACHI_DK23BA-20E-(PM)]

[Auto]

20004MB

[16 Sectors]

[Enabled]

[Fast PIO 4]

[Ultra DMA 2]

Select Item

Select Menu

Figure 2. Primary Master Submenu

Default

[Auto]

–—

*Note that actual hard drive label shown may vary.

Depending on the drive type, information such as cylin-

ders, heads and sectors may also be displayed.

-/Space

Change Values

Enter

Select

Sub-Menu

Description

Selects the ATA/ATAPI device type. Select Auto to have the type

automatically identified by the BIOS at POST. If None is selected, all

of the following Set-up items do not appear. Select CD-ROM if a

CD-ROM drive is installed at this connection. If Hard Disk is

selected, you must specify the number of Cylinders, Heads, and

Sectors for the drive.

This item appears only when Hard Disk is selected. When Hard Disk

is selected, you can change the value. This field is changed by

incrementing (pressing the [Spacebar]) or by typing in the number.

This item appears only when Hard Disk is selected. When Hard Disk

is selected, you can change the value. This field is changed by

incrementing (pressing the [Spacebar]) or by typing in the number.

This item appears only when Hard Disk is selected. When Hard Disk

is selected, you can change the value. This field is changed by

incrementing (pressing the [Spacebar]) or by typing in the number.

M a i n M e n u

Item Specific Help

Select ATA/ATAPI drive

installed here.

[Auto]

The BIOS auto-types the

drive on boot time.

Except [Auto]

You enter parameters of

the drive.

[None]

The drive is disabled.

Setup Defaults

F10

Save and Exit