Fujitsu Lifebook C2330 Manual Perangkat Lunak - Halaman 7
Jelajahi secara online atau unduh pdf Manual Perangkat Lunak untuk Laptop Fujitsu Lifebook C2330. Fujitsu Lifebook C2330 39 halaman. Lifebook c series
Juga untuk Fujitsu Lifebook C2330: Panduan Bios (31 halaman)
Halaman Cetak
Secondary Master Submenu of the Main Menu
The Secondary Master submenu is for the internal CD-
ROM drive. The drive type is displayed on this menu as
well as the Main menu. Your notebook auto-senses the
characteristics of the internal CD-ROM Drive installed.
Main
Secondary Master [TOSHIBA CD-ROM XM-7002B-(SM)]*
Type:
Multi-Sector Transfers:
LBA Mode Control:
PIO Transfer Mode:
DMA Transfer Mode:
F1
Help
ESC
Exit
Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu
Menu Field
Options
Type:
Auto
None
CD-ROM
Hard Disk
Multi-Sector
Disabled
Transfers:
2 Sectors
4 Sectors
8 Sectors
16 Sectors
32 Sectors
64 Sectors
128 Sectors
LBA Mode
Enabled
Control:
Disabled
PhoenixBIOS Setup Utility
[Auto]
[Disabled]
[Disabled]
[Fast PIO 4]
[Ultra DMA 2]
Select Item
-/Space
Select Menu
Enter
Figure 3 Secondary Master Submenu
Default
[Auto]
[Disabled]
[Disabled]
M a i n M e n u
You will not need to modify these settings, they are
displayed for your reference.
*Actual drive labels shown may vary.
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
Change Values
F9
Select
Sub-Menu
F10
Description
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following Set-up items do not appear. Select CD-ROM or
Hard Disk for appropriate drive type installed at this connection.
This option cannot be changed when Auto is selected. Specify the
number of sectors per block for multiple sector transfer.
Enables or disables Logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed when
Auto is selected.
Setup Defaults
Save and Exit
7