Brother P-touch E550W Panduan Pengaturan Cepat - Halaman 34
Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Pembuat label Brother P-touch E550W. Brother P-touch E550W 48 halaman.
Halaman Cetak
EDITING A LABEL
CABLE FLAG
Labels printed with this mode can be wrapped around a cable
or wire, and both ends of the label stick together to form a flag.
The text on flag labels is printed on both ends of the label,
leaving a blank space in the middle that wraps around the
cable. In this mode, you can specify the following items.
• Layout:
(Two different texts are printed on each block.)
• Flag Length: 30mm, 10mm-200mm
• Cable Diameter: 6mm, 3mm-90mm
• Orientation:
Horizontal
• You can enter up to two bar codes when
• We recommend using Flexible ID Tape for Cable Flag labels.
• Labels made with Flexible ID Tape are not designed for use as electrical insulation.
PATCH PANEL
Labels printed with this mode can be used to identify various
types of panels. In this mode, you can specify the following items.
• Block Length: 15.0mm, 5.0mm-300.0mm
• # of Blocks: 4, 1-99
• Separator:
(Bold),
• Orientation:
• Reverse: Off, On
• Advanced: Off, On
Adjust block length independently when "Advanced" is set to "On".
• No Margins: Off, On
Set the left and right label margins to zero.
"Advanced" and "No Margins" cannot be set to "On" at the same time.
34
Selecting a Labelling Application Type
(The same text is printed on each block.),
(Horizontal),
Flag
Cable
Flag
length
circum-
length
ference
(Tic),
(Dash),
(Frame),
(Horizontal),
1A-B01 1A-B02 1A-B03
Block length
(Vertical)
Vertical
Flag
length
is selected in flag layout.
(Line),
(None)
(Vertical)
Block length
Block length
1
1. Flag at least 5 mm
Cable
Flag
circum-
length
ference