Fujitsu LifeBook E7010 Panduan Bios - Halaman 26

Jelajahi secara online atau unduh pdf Panduan Bios untuk Laptop Fujitsu LifeBook E7010. Fujitsu LifeBook E7010 29 halaman. Lifebook e series

Halaman Cetak
L i f e B o o k E S e r i e s B I O S

Boot Device Priority Submenu of the Boot Menu

The Boot Device Priority Submenu is for setting the order of checking of sources for the operating system.
C A U T I O N S
Be careful of the operating environment when booting from a CD-ROM or you may overwrite files by mistake.
I
A bootable CD-ROM has either a floppy disk format or a hard drive format. When the bootable CD-ROM is used, the
I
drive allocations change automatically without changing the BIOS setup. If a floppy disk format is used, the CD-ROM
becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the internal hard drive is not present or
is disabled. The bootable CD-ROM can never use a C: designation if a formatted internal hard drive is present since
the C: designator is always reserved for the internal hard drive.The boot sequence ignores the new drive designations,
however, your application software will use the new designations.
Table 17: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
+Floppy Disk Drive
+Hard Disk Drive
CD-ROM Drive
Exiting from Boot Menu
When you have finished setting the boot parameters with
the Boot menu, you can either exit from the setup utility
26
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot Device Priority
+Floppy Disk Drive
+Hard Disk Drive
CD-ROM Drive
F1
Help
Select Item
ESC
Exit
Select Menu
Figure 17. Boot Device Priority Submenu
Options
Description
___
The boot selections determine the order in which the BIOS searches for the operating system
during a startup sequence. To view all devices related to a source, press [Enter]; to view all
devices related to all sources, press [Ctrl] + [Enter]. To change the order, highlight one source
by using the [up] or [down] cursor keys and then press the [+] or [-] key to change the order
number. [Shift] + [1] enables a device.Tapping [d] removes from the list a device that is not
installed.Be sure to save your changed order when you exit the BIOS setup utility.
NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may
be overwritten, depending upon your operating environment.
___
___
___
–—
Power Savings
Boot
Item Specific Help
The top device has the
highest priority.
<Enter> expands or
collapses devices with
a + or -.
<Ctrl+Enter> expands
all.
< > or < > selects a
device.
<+>/<Space> or <->
moves the device up or
down.
<Shift+1> enables or
disables a device.
-/Space
Change Values
Enter
Select
Sub-Menu
or move to another menu. If you wish to exit from the
setup utility press the Esc key to go to the Exit menu. If
you wish to move to another menu, use the cursor keys.
F9
Setup Defaults
F10
Save and Exit