Fujitsu Lifebook E751 Memulai - Halaman 4

Jelajahi secara online atau unduh pdf Memulai untuk Laptop Fujitsu Lifebook E751. Fujitsu Lifebook E751 13 halaman. Fujitsu lifebook e751: specifications
Juga untuk Fujitsu Lifebook E751: Lembar data (2 halaman)

Halaman Cetak

8. Create backup media with myRecovery

Recovery discs (for your pre-loaded factory image)

are NOT included with LIFEBOOKS that are shipped

with MyRecovery. If your hard drive crashes or the

computer system becomes corrupted, you can use

the recovery discs that you create to restore the

system to its original condition.

• Click on the [MyRecovery] icon on the desktop to create backup

recovery media and application discs.

• Refer to the "Restoring Your System Image and Software"

in your User's Guide for more

detailed instructions.

9. Access your User's Guide

• To take advantage of all the features of your new Fujitsu LIFEBOOK

notebook, it is highly recommended that you review your electronic

User's Guide. It contains important detailed information about your

new computer. You can access your User's Guide by selecting its

icon from the screen desktop.

Common Indicators

Status Display Panel

The Status Display Panel is located above the keyboard.

Following are some common indicators.

Power Indicator

Shows whether your system is operational.

It has several different states.

Steady On: Power to your notebook and

that it is ready for use.

Flashing: Your notebook is in Standby mode.

Steady Off: Your system is either in

Save-to-Disk mode, or that your

notebook has been turned off.

Battery Charge Indicator

Shows the charging status of the battery(ies).

Orange, solid: System battery is charging.

Green, solid: System battery is fully charged.

Orange, blinking: System is waiting to charge

battery (battery is out of thermal range).

Off: AC adapter is not plugged in.

Battery Level Indicators

Note that there are indicators for the primary

battery (Battery 1) and an optional second

battery (Battery 2.)

Green, solid: Battery is between 50% and

100% charged.

Orange, solid: Battery is between 14% and

49% charged.

Red, solid: Battery is 12% or less charged.

Orange, blinking: Blinks during battery

status measurement (Four seconds

after the battery is installed).

Red, blinking: There is a problem with

the battery.

Off: There is no battery installed.

If the battery pack is installed while the power is

turned off, the battery level indicator will display the

charge level for ﬁ ve seconds after it blinks orange.

If the AC adapter is not connected or the battery

pack is not fully charged when the computer is

switched to standby mode, the indicator will blink.

Batteries subjected to shocks, vibration or extreme

temperatures can be permanently damaged. A

shorted battery is damaged and must be replaced.

Security Indicator

Flashes (if a password was set) when the

system resumes from Off or Sleep modes.

You must enter the password that was set

in the Security Panel before your system

will resume operation.

Hard Drive/optical Drive Access Indicator

Glows green when your internal hard drive

is being accessed. Note that ﬂ ickering

is normal.

NumLk Indicator

Shows that the integral keyboard is set

in ten-key numeric keypad mode.

CapsLock Indicator

Shows that your keyboard is set to type

in all capital letters.

ScrLk Indicator

Shows that your scroll lock is active.

Quick Tips

It takes approximately 4 hours to

charge a fully discharged single

battery with unit off or in

suspend mode.

optimizing Battery Life

• Set power management setting

to Maximize Battery Life.

• Adjust display brightness levels

to lowest comfortable setting.

• Utilize Suspend mode when

not using your notebook.

• Read the Power Management

section in your electronic User's

Guide for additional features.

Adjusting Display Brightness

• Fn + F6 to decrease brightness

• Fn + F7 to increase brightness

Adjusting Volume

• Fn + F8 to decrease volume

• Fn + F9 to increase volume

Caution: Your system is

conﬁ gured with Trusted

Platform Module (TPM)

Before you activate TPM, be sure

you fully understand how it works

by following the directions included

on the TPM applications CD. If you

choose to enable TPM, your TPM

password will be critical to the

operation of your computer and

MUST be remembered.

Dust Filter

• Periodically clean the dust fi lter

for cooling effi ciency

Drivers

Look for the latest drivers by right-

clicking the FDU icon and selecting

"update", or download them at

us.fujitsu.com/computers.

(For Latest Drivers)

(FDU)