AEG L 71479 FL Panduan Pengguna - Halaman 29

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin cuci AEG L 71479 FL. AEG L 71479 FL 36 halaman.
Juga untuk AEG L 71479 FL: Panduan Pengguna (36 halaman)

Halaman Cetak

Problem

The appliance fills

with water and

drain immediately.

The washing re-

sults are not satis-

factory.

After the check, activate the appliance.

The programme continues from the

point of interruption.

If the problem occurs again, contact the

service centre.

Possible cause

The end of the drain

hose is too low.

The detergent you used

was not sufficient or cor-

rect.

You did not remove the

stubborn stains before

you wash the laundry.

Incorrect temperature

was set.

Too much laundry load.

Possible solution

Make sure that the drain hose is

in the correct position.

Increase the detergent quantity

or use a different one.

Use special products to remove

the stubborn stains.

Make sure that you set the cor-

rect temperature.

Decrease the laundry load.

If the display shows other alarm codes,

contact the service centre.

ENGLISH