Brother P-touch PT-1880 Panduan Pengguna
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Brother P-touch PT-1880. Brother P-touch PT-1880 1 halaman. Electronic labeling system
Juga untuk Brother P-touch PT-1880: Panduan Pengguna (2 halaman), Panduan Pengguna (1 halaman)
Halaman Cetak
USER'S GUIDE
English
/ Français
www.brother.ca
LW0737001
Printed in China
INTRODUCTION
With your PT-1880, you can create labels for any application. Select from the
many frames, character sizes and styles to design beautiful custom labels. In
addition, the variety of tape cartridges available allows you to print labels with
different widths and exciting colors.
Read this manual carefully before starting and keep the manual in a handy
place for future reference.
Industry Canada Compliance Statement (Canada Only)
Avis de conformité aux normes d'Industrie Canada (Canada seulement)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
GENERAL PRECAUTIONS
• Use only Brother TZ tapes with this machine. Do not use tapes that do not have
the
mark.
• Do not disassemble or modify the machine/AC adapter.
• Do not clean the machine with alcohol or other organic solvents. Only use a soft, dry
cloth.
• Do not touch the print head mechanism. Use a soft wipe (e.g. a cotton swab) when
cleaning the print head.
• To avoid injuries, do not touch the cutter's edge.
• To prevent damage or breakage, do not press on the LCD display.
• Do not put any foreign objects into or heavy objects on the machine.
• Do not leave any rubber or vinyl on the machine for an extended period of time,
otherwise the machine may be stained.
• Do not get the machine/AC adapter/power plug wet, such as by handling them with
wet hands or spilling beverages on to them.
• Do not expose the machine/AC adapter to extremely high temperatures or high
humidity. Never leave them on the dashboard or in the back of your car, near heaters
or other hot appliances. Keep them out of both direct sunlight and rain.
• Avoid using the machine in extremely dusty places.
• Depending on the environmental conditions and the applied settings, some
characters or symbols may be difficult to read.
• Do not pull on the tape being fed from the P-touch labeler, otherwise the tape
cassette or P-touch labeler may be damaged.
• Do not attempt to cut the tape while printing or feeding since this will damage the tape.
• Do not try to print labels using an empty tape cassette set in the P-touch labeler. Doing
so will damage the print head.
• Remove the batteries and disconnect the AC adapter if you do not intend to use the
machine for an extended period of time. (Note: When power is disconnected for more
than five minutes, all text, format settings and any text files stored in the memory will
be cleared.)
• Do not use old and new batteries together or mix alkaline batteries with other type
batteries, or set the positive and negative end in the wrong position. Otherwise, the
batteries may leak or be damaged.
• Do not use metallic articles, such as tweezers or metallic pen, when exchanging the
batteries.
• Always use the specified voltage and the suggested AC adapter (AD-24) for this
machine to prevent any damage or failure.
• To prevent fire or electric shock, make sure that the plug of the AC adapter is fully
inserted into the power outlet. Do not use an outlet that is loose.
1
1
MAKING TEXT
Setting Font
image
image
Switching Upper Case/Lower Case
>
Upper case (
ON)
Lower case (
OFF)
Making Two Line Text
Move the cursor to where the second line starts and press
.
Use either 3/8" (9 mm) or 1/2" (12 mm), or 3/4" (18 mm) wide tape for two line text.
Display
Label image
Entering Symbols
>
Group
Symbols
Group
Symbols
1
7
2
8
3
9
4
10
5
11
6
12
• To go to the next group, press
.
• To cancel operations, press
.
Entering Accented Characters
>
>
>
/
/
Accented Characters
Accented Characters
A
a
C
c
D
d
E
e
G
g
I
i
K
k
L
l
N
n
O
o
R
r
S
s
T
t
U
u
Y
y
Z
z
• To cancel operations, press
.
• The order of accented characters differ by the selected LCD language.
To Clear
(
+
To delete a character one by one
To delete all text
>
>
[Clear]
[Text Only]
To delete all text & format
>
>
[Clear]
[Text & Format]
[Text Only]
+
You can also go into [Text & Format] /
by pressing
1
1
PREPARATION
Unpacking Your P-touch Labeler
Check that the package contains the following before using your P-touch la-
beler.
PT-1880
TZ tape cassette
User's Guide
Tape Catalog
Warranty Card
Included items may differ by distribution area.
Tape Cassettes
Make sure that the power is turned off when replacing a tape cassette.
Open the tape compartment cover by lifting up both sides at the same time.
If a tape cassette is already installed, remove it by pulling it straight up.
Insert a tape cassette, making sure that it snaps into place.
End of tape
Tape compartment
Toothed Wheel
cover
Tape guide
• Make sure that the end of the tape feeds under the tape guides.
• If the ink ribbon is loose, use your finger to wind the toothed wheel in the
direction of the arrow on the cassette.
After you have installed the tape, feed the tape (
+
) once and then
push in the tape cutter lever to cut the tape.
Securely close the front cover, making sure that it snaps into place.
Power Supply
Make sure that the power is turned off when replacing batteries.
Turn the machine over and remove the battery compartment cover.
If batteries are already installed, remove them.
Insert six new AA-size alkaline
Battery compartment
batteries (LR6), making sure that
cover
their poles point in the correct
directions. Always replace all six
batteries at the same time using
brand new ones.
Attach the battery compartment cover by inserting the three hooks at the
bottom into the slots on the machine, then pushing down firmly on the
cover until it snaps into place.
When using optional AC adapter (model
AD-24)
Insert the plug on the adapter cord into
the adapter jack on the right side of the
machine.
Insert the plug into the nearest standard
electrical outlet.
For memory back up, we recommend using
AA-size alkaline batteries (LR6) together
when using the AC adapter.
2
2
DESIGNING LABELS
Setting [Size]
>
>
[
]
[
]
Size
Large
[Large]
[Medium]
[Small]
[MAX]
Automatically adjusts the text size according to the tape width.
Select MAX to print with maximum text size when using 3/4" (18 mm) tape, all
texts are in upper case, the Style setting is [Normal], and the Underline/Frame
setting is [Off].
Setting [Width]
>
>
×2
[
Width
]
[
]
×
×
[Normal]
[
2]
[
1/2]
Setting [Style]
(Vertical)
>
>
[
Style
]
[
Vertical
]
[Normal]
[Bold]
[Outline]
[Shadow]
[Italic]
[Italic Bold]
[Italic Outl](Italic Outline) [Italic Shadow]
[Vertical]
Setting [Underline/Frame]
>
>
[
Underline/Frame
]
[
Underline
]
[Off]
[Underline]
[Round]
[Candy]
[Callout]
[Banner]
[Wooden]
[Vine]
[Hand]
[Flower]
Frames cannot be printed on 9/64" (3.5 mm) tape.
Setting [Label Length]
(Auto / 1.2" - 12.0")
>
>
[
]
Label Length
• You can also select the length by entering the length with Num keys.
• To return to [Auto], press
.
Setting [Tab]
You can make aligned texts by setting tabs.
Example: To set a tab between "ABC" and "D"
The cursor should be positioned where you set a tab.
>
Display
Label image
ABC
D
Tab
Setting [Tab Length]
(Auto / 0.0" - 4.0")
>
>
[
]
Tab Length
• You can also select the length by entering the length with Num keys.
• To return to [Auto], press
.
)
Setting [Auto Format]
You can choose label length from six formats to create labels for various ap-
plications.
>
[VHS Spine]
Application
Length
Application
VHS Spine
5.5" (140 mm)
CD Case Spine
MiniDV Spine
1.6" (42 mm)
File Tab
Audio Tape
3.5" (89 mm)
Divider Tab
.
2
2
OPERATION
Keyboard & LCD
Size
Cursor
Caps
Tape cutter lever
Print key
Preview key
Font keys
Character keys
Tab key
Caps key
Shift key
Symbol key
Auto Format key
• The LCD shows one row of 15 characters; however, the text that
you enter can be up to 80 characters in length, which will scroll
across the display.
• Use
with Shift key to go to beginning/end of the text.
Turning the Power On
Setting Language (
English/Spanish/
French/Portuguese
>
>
[Language]
/
Setting unit
(inch/mm)
>
>
[Unit]
/
[inch]
• The machine automatically turns off if no key is pressed within 5
minutes.
• To cancel operations, press
.
• To initialize the P-touch labeler back to factory settings, turn off the
machine and then while holding down
turn the machine back on. Finally, release
3
3
PRINTING LABELS
Text Preview
(
+
)
You can preview the text before printing.
• The LCD shows the whole text and the label length (inch/mm), then returns to the
original text.
• Only the text can be previewed, not the font, style, size, underline/frame or any
additional features.
Feeding
(Tape Feed)
(
+
)
+
• The machine will feed 1" (25mm) of tape, which may be needed when installing a new
tape cassette or when using the [Chain Print] feature.
Printing
(
+
)
• To cut off the label, push in the tape cutter lever on the upper-left corner of the
machine.
• To prevent damage to the tape, do not try to cut while the message "Print" or "Feed"
is displayed.
Setting [Margin]
(Tape Margin)
>
>
[Margin]
[Full]
[Full]/[Half]/[Narrow] is for leaving equal margins on both sides of the text.
NOTE: Cut along the printed dots (:) with scissors so the text is centered in the label.
Full
Half
(
+
)
ABC
:
ABC
1"(25mm)
1"(25mm)
1/2"(12mm)
1/2"(12mm)
[Chain Print] is for printing more than 1 copy of a label with minimum margin
<e.g. 1>. You can also create a label containing text in various styles; print a
text in one style, and before feeding, enter the second text in another style
<e.g. 2>.
FEED THE TAPE BEFORE USING THE CUTTER (see Feeding/Printing).
Otherwise A PART OF THE TEXT MAY BE CUT OFF. Do not try to pull the
tape since this may damage the tape cassette.
Chain Print
(
+
)
<e.g. 1>
<e.g. 2>
ABC
ABC
ABC
ABC
(feed & cut)
Using [Print Option]
[Copies]
You can print up to 9 copies of each label.
>
>
[
]
[
Print Option
Copies
You can also select the number of copies by entering with Num keys.
[Numbering]
You can print many copies of the same text while increasing a selected
number by 1 after each label is printed.
(
+
)
Example: To print copies of a label containing a serial number (0123, 0124 and 0125)
>
>
[
Print Option
>
[
]
Numbering
Select the highest number you wish to be printed when setting the number.
[Mirror]
>
>
[
Print Option
]
[
Mirror
]
Length
Use clear tape in [Mirror], so the labels can be read correctly from the oppo-
4.4" (113 mm)
site side when attached on glass, windows or other transparent surfaces.
3.2" (82 mm)
1.6" (42 mm)
[GETTING STARTED]
3
3
REFERENCE
Troubleshooting
Error message
Message
Width
Battery Weak!
The batteries are weak. Replace them with new ones.
Check Battery!
The installed batteries are about to run out.
Invalid!
• There is no text above the cursor when you set Number-
ing.
• Invalid character is selected for Numbering.
Style
• Invalid number is selected for Tab Length or Label Length.
Underline/Frame
Label Length
No Text!
• You tried to print a text file when there is no data stored in
the memory.
• The Print key is pressed when no text is entered.
• You tried to set Copies, Numbering or Mirror when no text
is entered.
Line Limit!
• You tried to enter a 3rd line by pressing Enter key.
• You tried to print a 2 line text when 9/64" (3.5 mm) or 1/4"
(6 mm) tape is installed.
No Cassette!
You tried to print a label when there is no cassette installed.
Cutter Error!
Tape cutter lever is used in the middle of printing process.
Full!
The maximum number of characters (80 characters) have
already been entered.
Text Too Long!
The text length exceeds the selected label length or the
Esc key
selected Auto Format setting length.
OK key
Cursor keys
No Frame OK?
Printing on 9/64" (3.5 mm) tape with invalid Frame setting
Power key
ON. (Select
to print with no Frame,
Function key
Backspace key
What to do when...
Enter key
Problem
The display stays blank
• Check that the batteries are correctly inserted.
Shift key
after you have turned on
• If the batteries are weak, replace them.
Accent key
the machine.
• Check that the AC adapter is correctly connected.
Space key
• Refer to "Setting [Margin] (Tape Margin)" on this users
When the label is
printed out, there is too
guide and select [Half] or [Narrow] to have smaller margins
much margin (space) on
for your label.
both sides of the text.
The machine does not
• Check that the tape cassette has been inserted correctly.
print, or the printed
• If the tape cassette is empty, replace it.
characters are not
• Check the tape compartment cover is properly closed.
formed properly.
The setting has cleared
• The batteries may be weak. Replace them.
on its own.
• When power is disconnected for more than five minutes, all
text & formats in the display will be lost. Language and unit
settings will also be cleared.
A blank horizontal line
• There maybe some dust on the print head. Remove the
appears through the
tape cassette and use a dry cotton swab to gently wipe the
printed label.
print head with and up-and-down motion.
• The print head can be cleaned more easily if the optional
print head cleaning cassette (TZ-CL4) is used.
The machine has
• Turn off the machine, and then while holding
"locked up" (i.e., nothing
down
and
happens when a key is
)
(
+
)
pressed, even though
on. Finally, release
the machine is on.)
• Note: The text and formats in the display are erased. Also,
the language and unit settings will be cleared.
[English]
/
The power turns off
• The batteries may be weak. Replace them.
when you try to print.
• Check that the batteries are correctly inserted.
The tape does not feed
• Check that the end of the tape feeds under the tape guides.
properly or the tape gets
• The cutter lever is used while printing. Do not touch the
(
+
)
stuck inside the machine.
cutter lever during printing.
All text and format settings
• Press
while holding down
need to be cleared to
mat].
/
create a new label.
Specifications
Item
6.6" (W) × 8.5" (D) × 2.2" (H)
Dimensions
(167mm (W) × 215mm (D) × 57mm (H))
and
, press
to
Weight
1.26 lbs. (570 g) (without batteries and tape cassette)
and
.
Power supply
Six AA-size alkaline batteries (LR6) or optional AC adapter
(model AD-24)
Tape cassette
Brother TZ tape (width) :
9/64" (3.5 mm), 1/4" (6 mm), 3/8" (9 mm), 1/2" (12 mm), 3/4" (18 mm)
All specifications are subject to change without notice.
Accessories
(Supplies may differ by distribution area.)
Accessories
Tape Cassettes
See the attached "Tape Catalog".
AC Adapter
model AD-24
Carrying Case
CC3500
[CREATING LABELS]
4
4
COMPLETED LABELS
Peel the printed label from backing and apply the label.
USEFUL FUNCTIONS
Memory
(File)
You can save your original labels on to your machine. Up to five labels can
be saved and recalled for printing whenever you desire. You can also edit and
overwrite the stored label.
>
>
[File]
To Save:
(
+
)
>
>
[Save]
To Print:
>
>
[Print]
Narrow
To Open:
:
ABC
>
>
[Open]
1/6"(4mm) 1/6"(4mm)
If you try to store a label when there is already a label stored to that
number, a message "Overwrite?" will appear. Press
new label. Press
to cancel.
Function Shortcuts
In addition to the basic steps to search for a function, the PT-1880 provides
ABC
you with function shortcuts so you can easily jump to a frequently used func-
DEF
(feed & cut)
tion just by pressing
and the shortcut key shown in the table below. To
confirm, press
.
(
+
)
Key
Function
[Size]
>
]
[Width]
[Style]
[Underline/Frame]
[File]
[Label Length]
>
]
>
[Mirror Print?]
Contact Information
Website: www.brother.ca
TEL:1-877-Brother
Cause/Remedy
to cancel.)
Solution
, press
to turn the machine back
and
.
, and select [Text&For-
Specification
Stock No.
(
+
)
>
>
to save your
(
+
)
Key
Function
[Margin]
[Tab Length]
[Print Option]
[Language]
[Unit]
[Clear]