Brother P-touch QL-1050N Panduan Pengguna Jaringan - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna Jaringan untuk Pembuat label Brother P-touch QL-1050N. Brother P-touch QL-1050N 41 halaman. Quick setup guide (español) - english
Juga untuk Brother P-touch QL-1050N: Panduan Memulai Cepat (2 halaman), Panduan Pengguna (42 halaman), Panduan Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna (41 halaman), Panduan Pengguna (24 halaman)

Double-click the unconfigured device.

Windows

Note

• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the

device will appear as Unconfigured in the BRAdmin Light utility screen.

• You can find the node name and Ethernet address by printing out the Printer Settings Page. See Printing

the Printer Settings on page 14.

Choose Static from Boot Method. Enter the IP address, Subnet Mask and Gateway (if needed) of

your print server.

Windows

Click OK.

With the correctly programmed IP address, you will see the Brother print server in the device list.

Macintosh

Configuring your network printer