Brother P-touch QL-1050N Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Brother P-touch QL-1050N. Brother P-touch QL-1050N 24 halaman. Quick setup guide (español) - english
Juga untuk Brother P-touch QL-1050N: Panduan Memulai Cepat (2 halaman), Panduan Pengguna (42 halaman), Panduan Pengguna Jaringan (41 halaman), Panduan Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pengguna (41 halaman)

Halaman Cetak
Brother P-touch QL-1050N Panduan Pengguna

6 Using Interface Cable

RS-232C cable and Network cable are not standard accessories.
Choose the appropriate cable for your interface.
•
USB cable
Use the enclosed interface cable.
•
RS-232C cable
The pin assignments for the serial cables (RS-232C cables) which can be used with this
machine are shown in the table below. You can purchase the cables at an electronics
store. Do not use an interface cable that is longer than 2 metres.
Brother QL side
D-sub female, lock screw #4-40 (UNC).
Signal
Pin
Name
Number
DCD
1
RXD
2
TXD
3
DTR
4
GND
5
DSR
6
RTS
7
CTS
8
RI
9
It is not possible to connect a RS-232C cable and USB cable to the printer at the
•
same time.
The RS-232C serial connector part of this equipment is not Limited Power Source.
•
•
Network cable (QL-1060N only)
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network.
Pin Assignments
PC side
(D-Sub9P female)
Pin
Signal
Number
Name
1
DCD
2
RXD
3
TXD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
RI
11
STEP
1
STEP
2
STEP
3