Brother P-touch QL-710W Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Brother P-touch QL-710W. Brother P-touch QL-710W 23 halaman. Label printer
Juga untuk Brother P-touch QL-710W: Panduan Pengguna Jaringan (48 halaman), Panduan Pengguna Perangkat Lunak (48 halaman), Panduan Pengguna (23 halaman), Panduan Pengaturan Cepat (38 halaman)
Halaman Cetak
2
1 Using The Interface Cable
An RS-232C cable and Network cable are not standard accessories.
Choose the appropriate cable for your interface.
•
USB cable
Use the enclosed interface cable.
•
RS-232C cable (QL-720NW only)
The pin assignments for serial cables (RS-232C cables) which can be used with this
machine are shown in the table below. You can purchase these cables at an electronics
store. Do not use an interface cable that is longer than 2 metres.
Brother QL side
D-sub female, lock screw #4 - 40 (UNC).
Signal
Name
DCD
RXD
TXD
DTR
GND
DSR
RTS
CTS
RI
The RS-232C serial connector part of this equipment is not Limited Power Source.
•
Network cable (QL-720NW only)
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network.
Pin
Number
1
2
3
4
5
6
7
8
9
Pin Assignments
PC side
(D-Sub9P female)
Pin
Signal
Number
Name
1
DCD
2
RXD
3
TXD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
RI