AEG L 75675 FL Panduan Pengguna - Halaman 16
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin cuci AEG L 75675 FL. AEG L 75675 FL 32 halaman. Aeg washer user manual
Halaman Cetak16
SETTING AND STARTING A PROGRAMME
1. Turn the programme knob. The re-
lated programme indicator comes
on.
2. The indicator of button
with red colour.
3. The display shows the default tem-
perature and spin speed. To change
the temperature and/or the spin
speed, press the related buttons.
4. Set the available functions. The indi-
cator of the set function comes on
or the display shows the related
symbol.
5. Press button
gramme. The indicator of button
is on.
INTERRUPT A PROGRAMME
1. Press button
flashes.
2. Press button
programme continues.
CANCEL A PROGRAMME
1. Press button
gramme and to deactivate the ap-
pliance.
2. Press button
the appliance. Now, you can set a
new washing programme.
The appliance does not drain
the water.
CHANGE A FUNCTION
You can change only some functions
before they operate.
1. Press button
flashes.
2. Change the function set.
SET THE DELAY START
1. Press button
until the display shows the number
flashes
4
to start the pro-
4
4
. The indicator
4
again. The washing
to cancel the pro-
1
1
again to activate
4
. The indicator
again and again
5
of minutes or hours. The related
symbols comes on.
2. Press button
starts the countdown of the delay
start.
When the countdown is completed,
the programme starts automatically.
Before you press button
start the appliance, you can can-
cel or change the set of the de-
lay start.
You cannot set the delay start
with the Steam programme.
4
CANCEL THE DELAY START
1. Press button
cator flashes.
2. Press button
until the display shows 0'.
3. Press button
starts.
OPEN THE DOOR
While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1. Press button
symbol in the display goes off.
2. Open the appliance door.
3. Close the appliance door and press
button
4
delay start continues.
If the temperature and level of
the water in the drum are too
high, the door lock symbol stays
on and you cannot open the
door. To open the door do the
steps that follow:
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that no water is in
the drum.
, the appliance
4
4
4
. The related indi-
5
again and again
4
. The programme
4
. The door lock
. The programme or the
to