Brother P300BT Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Brother P300BT. Brother P300BT 18 halaman. P-touch cube
Juga untuk Brother P300BT: Panduan Pengguna (18 halaman)

Halaman Cetak

2. Installing Batteries or Connecting the AC Adapter

This label printer requires six (6) AAA alkaline batteries or six (6) fully-charged AAA

Ni-MH batteries, not included. As an alternative, use the optional AC Adapter and plug your

machine into an AC socket.

1. Hold your machine as shown in the

illustration. Open the Battery Cover

by pressing the mark on its side (1)

and pulling in the direction of the

arrow (2).

2. Insert six batteries as shown in the

illustration inside the case. Alternate

the positive and negative poles,

making sure the negative poles touch

the coil spring in the battery slot.

3. Insert the two hooks at the rear of the

Battery Cover into the slots on your

machine (3). Push the Battery Cover

(4), making sure it locks into place.

The coils are

negative pole