Brother PT-1010S Panduan Pengguna

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Brother PT-1010S. Brother PT-1010S 1 halaman. Users manual - spanish
Juga untuk Brother PT-1010S: Panduan Pengguna (Bahasa Inggris) (1 halaman)

Halaman Cetak

USER'S GUIDE

English

/ Français

www.brother.ca

Printed in China

LW1952001

INTRODUCTION

With your P-touch 1010, you can create labels for any application. Select from

the many frames, character sizes and styles to design beautiful custom la-

bels. In addition, the variety of tape cartridges available allows you to print la-

bels with different widths and exciting colors.

Read this manual carefully before starting and keep the manual in a handy

place for future reference.

Industry Canada Compliance Statement (Canada Only)

This Class B digital apparatus complies with Canadian ICES-003.

WARNING

• Always use the specified voltage and the suggested AC adapter (AD-24) for this

machine to prevent any damage or failure.

• Unplug the power cord immediately and stop using the P-touch during an electrical

storm. There may be a remote risk of electric shock from lightning.

• Do not use the AC adapter in places with high humidity such as bathrooms.

• Do not overload the power cord.

• Do not place heavy objects on, or damage the power cord or plug. Do not forcibly bend

or pull the power cord. When disconnecting the power cord from the power outlet,

always hold the plug.

• To prevent fire or electric shock, make sure that the plug is fully inserted to the power

outlet. Do not use an outlet that is loose.

• Do not get the machine/AC adapter/power plug wet, such as by handling them with

wet hands or spilling beverages on to them.

• Do not disassemble or modify the machine/AC adapter/batteries.

• Disconnect the AC adapter, remove batteries and stop using immediately if you notice

any abnormal odour, heat, discolouration, deformation or anything unusual while in

use, or in storage.

• Do not use metallic articles, such as tweezers or a metallic pen, when exchanging the

batteries.

CAUTION

• To avoid injuries, do not touch the blade of the cutter unit or any metal parts near the

print head.

• Do not apply excessive pressure to the cutter lever.

• Remove the batteries and disconnect the AC adapter if you do not intend to use the

machine for an extended period of time. (Note: When power is disconnected for more

than two minutes, all text & formats in the display will be lost. Language, Unit and

Time/Date settings will also be cleared.)

• To avoid battery leakage or damage, make sure batteries are inserted correctly.

• To prevent damage or breakage, do not drop or hit the machine/AC adapter or press

on the LCD display.

• Depending on the location, material, and environmental conditions, the label may

unpeel or become irremovable, the color of the label may change or be transferred to

other objects. Before applying the label, check the environmental condition and the

material.

• Any data stored in memory may be lost due to failure or repair of the P-touch, or if the

battery expires.

General Precautions

• Do not use the P-touch in any way or for any purpose not described in this guide.

Doing so may result in accidents or damage to the machine.

• Use only Brother TZ tapes with this machine. Do not use tapes that do not have the

mark.

• Do not clean the machine with alcohol or other organic solvents. Only use a soft, dry

cloth.

• Do not touch the print head with your fingers. Use a soft wipe (e.g. a cotton swab)

when cleaning the print head.

• Do not put any foreign objects into the tape exit slot or AC adapter connector, etc.

• Do not place the P-touch in direct sunlight or rain, near heaters or other hot

appliances, dashboard or in the back of your car, in any location exposed to extremely

high or low temperatures, high humidity, or dusty locations. Standard operating

temperature range: 10 °C to 35 °C (50 °F to 95 °F).

• Do not try to print labels using an empty tape cassette in the P-touch. Doing so will

damage the print head.

• Do not pull the tape being fed from the P-touch, otherwise the tape cassette or P-touch

may be damaged.

MAKING TEXT

Switching Upper Case/Lower Case

Upper case (

ON)

Lower case (

OFF)

Making Two Line Text

Move the cursor to where the second line starts and press

Use either 3/8" (9 mm) or 1/2" (12 mm) wide tape for two line text.

Display

Label image

Entering Symbols

Group

Symbols

Group

Symbols

• To go to the next group, press

• To cancel operations, press

Entering Accented Characters

Accented Characters

• To cancel operations, press

• The order of accented characters differ by the selected LCD language.

To Clear

By pressing the Backspace Key, the letters will be deleted one by one.

All text and settings will be cleared.

[

]

Txt&Format

Only text will be cleared.

[

Text Only

]

PREPARATION

Power Supply & Tape Cassettes

Open the tape compartment

Tape compartment

cover

cover by pressing in the rough

area at the top end of the

machine.

If a tape cassette is already

installed, remove it by pulling it

straight up. Also, if batteries are

already installed, remove them.

head

• Make sure that the power is

turned off when replacing

batteries or tape cassette.

Tape cutter lever

Insert six new AAA alkaline

batteries (LR03), making sure

that their poles point in the

correct directions. Always

replace all six batteries at the

same time using brand new

ones.

Insert a tape cassette, making

sure that it slots into place.

End of tape

Toothed Wheel

Cutter's edge

Tape guide

Tape exit slot

• Make sure that the end of the tape feeds under the tape guides.

• If the ink ribbon is loose, use your finger to wind the toothed wheel in the

direction of the arrow on the cassette.

• Use only Brother TZ tapes with this machine.

Securely close the back cover, making

sure that it slots into place.

After you have installed the tape, feed the

tape (see Feeding) once and then push in the

tape cutter lever to cut the tape.

When using optional AC adapter (AD-24)

Insert the plug on the adapter cord into

the adapter jack on the bottom end of

the machine.

Insert the plug into the nearest standard

electrical outlet.

For memory back up, we recommend using

AAA alkaline batteries (LR03) together with

the AC adapter.

DESIGNING LABELS

[Size]

(

[

Size

]

[

Large

]

[Large]

[Medium]

[Small]

Automatically adjusts the text size according to the tape width.

[Width]

(

×2

[

Width

]

[

]

[Normal]

[

1/2]

[Style]

(

(Vertical)

[

Style

]

[

Vertical

]

[Normal]

[Bold]

[Outline]

[Shadow]

[Italic]

[I+Bold](Italic Bold)

[I+Outl](Italic Outline)

[I+Shadow](Italic Shadow) [Vertical]

[Underline/Frame]

(

[

]

[

]

Undl/Frm

Undl

[Off]

[Undl](Underline) [Round]

[Candy]

[Callout]

[Banner]

[Wooden]

Frames cannot be printed on 9/64" (3.5 mm) tape.

[Tab]

(

You can align text by setting tabs.

Example: To set a tab between "ABC" and "D"

The cursor should be positioned where you set a tab.

[

Tab

]

Display

Label image

ABC

Tab

[Tab Length]

(

(Auto / 0.0" - 4.0" (0-100 mm))

[

]

Tab Length

• You can also select the length by entering the length with Number keys.

• To return to [Auto], press

[Label Length]

(Auto / 1.2" - 12.0" (30-300 mm))

(

[

]

Length

• You can also select the length by entering the length with Number keys.

• To return to [Auto], press

[Auto Format]

(

You can choose label length from six formats to create labels for various ap-

plications.

[

]

A/F

[VCR VHS]

Application

Length

Application

Length

VCR VHS

5.5" (140 mm)

CD Spine

4.4" (113 mm)

Mini DV

1.6" (42 mm)

File Tab

3.2" (82 mm)

Audio

3.5" (89 mm)

Divider

1.6" (42 mm)

You can also use the Function shortcuts for these menu. Press the

and the shortcut key shown next to the menu title. To confirm,

press

OPERATION

Keyboard & LCD

Size

Cursor

Caps

Time/Date key

Power key

Cursor key

Clear key

Number key

Caps key

Symbol key

The LCD shows one row of 12 characters; however, the text that you

enter can be up to 80 characters in length.

Initial Settings

Start your machine

Supply power by using six AAA alkaline batteries or the optional AC adapter, and

then press

Set the language (English/Español/Français/Hrvatski/Italiano/Magyar/

Nedrlnds/Norsk/Polski/Portug./Romana/Slovenski/Slovensky/Suomi/

Svenska/

/Dansk/Deutsch)

The default setting is "English".

[

Language

]

Choose a language with

and press

Set the unit (inch/mm)

The default setting is "inch".

Unit

[

]

Choose unit with

and press

Set Date (MM/DD/YY) and Time (hh:mm)

Example: setting the clock to October 21st 2007, 10:30AM

TimeDate

[

]

Date (MM/DD/YY)

input "10"

input "21"

input "07"

Time (hh:mm)

input "10"

input "30"

Select AM/PM with

and press

You can also confirm the figure and move to the next setting by using the right

cursor key.

• The machine automatically turns off if no keys are pressed for 5

minutes.

• To cancel operations, press

• To reset the machine to default settings, turn off the machine and

then while holding down

and

, press

machine back on. Finally, release

and

PRINTING LABELS

Text Preview

+ )

You can preview the text before printing.

Preview

[

]

• The LCD shows the whole text and the label length (inch/mm), then returns to the

original text.

• Only the text can be previewed, not the font, style, size, underline/frame or any

+ )

additional features.

Feeding

(Tape Feed)

Feed

[

]

Printing

+ )

• To cut off the label, push in the tape cutter lever on the upper-right corner of the

machine.

• To prevent damage to the tape, do not try to cut while the message "Print" or "Feed"

is displayed.

• When Chain Print is set, "OK to Feed?" will appear after printing. (See the Note of

[Chain Prt] in [Margin] (Tape Margin). )

[Margin]

(Tape Margin)

[Margin]

[Full]

+ )

[Full]/[Half]/[Narrow] is for leaving equal margins on both sides of the text.

NOTE: Cut along the printed dots (:) with scissors so the text is centered in the label.

Full

Half

Narrow

ABC

1" (25 mm)

1/2" (12 mm) 1/2" (12 mm)

[Chain Prt] (Chain Print) is for printing more than 1 copy of a label with min-

imum margin <e.g. 1>. You can also create a label containing texts in various

styles; enter a text in one style and press

. After that, cancel feeding (see

the note below), and enter the second text in another style <e.g.2>.

+ )

Chain Print

<e.g. 1>

<e.g. 2>

ABC

DEF

(feed & cut)

• FEED THE TAPE BEFORE USING THE CUTTER OTHERWISE A

PART OF THE TEXT MAY BE CUT OFF.

• After printing, "OK to Feed?" will appear. Press

to cancel.

• Do not try to pull the tape since this may damage the tape cassette.

+ )

Using [Print Option]

[Copies]

You can print up to 9 copies of each label.

[

Print Option

]

[

Copies

+ )

You can also select the number of copies by entering with Number keys.

[Numbering]

You can print many copies of the same text while increasing a selected

+ )

number by 1 after each label is printed.

Example: To print copies of a label containing a serial number (0123, 0124 and 0125)

[

Print Option

[

Numbering

]

Select the highest number you wish to be printed when setting the number.

[Mirror]

[

]

[

Print Option

Mirror

[Mirror Prt?]

Use clear tape in [Mirror], so the labels can be read correctly from the oppo-

site side when attached on glass, windows or other transparent surfaces.

[GETTING STARTED]

REFERENCE

Troubleshooting

Error message

Message

Cause/Remedy

Width

Battery

The batteries are weak. Replace them with new ones.

Style

BATTERY!

The installed batteries are about to run out.

Invalid

• There is no text above the cursor when you set Numbering.

Underline/Frame

• Invalid character is selected for Numbering.

• Invalid number is selected for Tab Length or Label Length.

Label Length

No Text

• You tried to print a text file with no data stored in the mem-

Print key

ory.

Enter key

• The Print key was pressed when no text was entered.

• You tried to set Copies, Numbering, Mirror, or Text Preview

Backspace key

when no text was entered.

Function key

Line Lmt

• You tried to enter a 3rd line by pressing the Enter key.

• You tried to print a 2 line text with 9/64" (3.5 mm) or 1/4"

(6 mm) tape installed.

No Cassette

You tried to print a label with no cassette installed.

Cutter Error

Tape cutter lever was used in the middle of printing process.

Character key

Full

The maximum number of characters (80 characters) has

already been entered.

Text Lmt

The text length exceeds the selected label length or the

Accent key

selected Auto Format setting length.

Space key

No Frame OK?

Printing on 9/64" (3.5 mm) tape with invalid Frame setting ON.

(Select

to print with no Frame,

What to do when...

Problem

The display stays blank

• Check that the batteries are correctly inserted.

after you have turned on

• If the batteries are weak, replace them.

the machine.

• Check that the AD-24 adapter is correctly connected.

• See "[Margin] (Tape Margin)" in this users guide and select

When the label is

printed out, there is too

[Half] or [Narrow] to have smaller margins for your label.

much margin (space) on

both sides of the text.

The machine does not

• Check that the tape cassette has been inserted correctly.

print, or the printed

• If the tape cassette is empty, replace it.

characters are not

• Check the tape compartment cover is properly closed.

formed properly.

The setting has cleared

• The batteries may be weak. Replace them.

on its own.

• When power is disconnected for more than two minutes,

all text & formats in the display will be lost. Language, Unit

and Time/Date settings will also be cleared.

A blank horizontal line

• There maybe some dust on the print head. Remove the

appears through the

tape cassette and use a dry cotton swab to gently wipe the

printed label.

print head with an up-and-down motion.

The machine has

• Turn off the machine, and then while holding down

"locked up" (i.e., nothing

and

, press

happens when a key is

Finally, release

and

pressed, even though

the machine is on.)

• Note: The text and formats in the display are erased. Also,

the language, Unit and Time/Date settings will be cleared.

The power turns off

• The batteries may be weak. Replace them.

when you try to print.

• Check that the batteries are correctly inserted.

The tape does not feed

• Check that the end of the tape feeds under the tape guides.

properly or the tape gets

• The cutter lever was used while printing. Do not touch the

stuck inside the machine.

cutter lever during printing.

All text and format settings

• Press

and select [Txt&Format].

need to be cleared to

[Clock]

create a new label.

To change language

• See step 2 "Set the language" of the "Initial Settings".

setting.

Specifications

Item

Specification

4.3" (W) × 8.1" (D) × 2.3" (H)

Dimensions

(107.4 mm (W) × 202.6 mm (D) × 56.6 mm (H))

Weight

0.8 lbs. (365 g) (without batteries and tape cassette)

Power supply

Six AAA alkaline batteries (LR03) or optional AC adapter

(AD-24)

Tape cassette

Brother TZ tape (width) :

9/64" (3.5 mm), 1/4" (6 mm), 3/8" (9 mm), 1/2" (12 mm)

Accessories

(Supplies may differ by distribution.)

Accessories

Stock No.

Tape Cassettes

See the included "Tape Catalog".

AC Adapter

AD-24

Cutter Unit

TC-5 (replacement)

to turn the

If the cutter blade becomes blunt and/or the cutter stopper wears out after

repetitive use, causing the cutter to not cut the tape cleanly, replace with a

new cutter unit (stock no. TC-5) which can be obtained from an authorised

Brother reseller.

[CREATING LABELS]

COMPLETED LABELS

(

+ )

Peel the printed label from backing and apply the label.

USEFUL FUNCTIONS

(

+ )

File

(Memory)

You can save your original labels on to your machine. Up to nine labels can

be saved and recalled for printing whenever you desire. You can also edit and

overwrite the stored label.

[

File

]

To Save:

[

Save

]

To Print:

[

]

To Open:

[

Open

]

(

+ )

If you try to store a label when there is already a label stored to that

number, a message "Overwrite?" will appear. Press

new label. Press

to cancel.

Time/Date Function

You can insert the desired time and date to your text at the touch of a button.

ABC

8 Formats are available for printing time and date.

You can change the number of time/date by changing the clock setting.

1/6" (4 mm)

To add Time/Date to your text:

The cursor should be positioned where you wish to insert the time and date.

To select the format of Time/Date:

[TimeDate]

(feed & cut)

Example

Format

to feed. Press

(October 21st 2007, 3:30PM)

M/D/Y

10/21/07

D.M.Y

M/D/Y hm

10/21/07 03:30PM

D.M.Y hm

(

)

D/M/Y

21/10/07

Y-M-D

D/M/Y hm

21/10/07 03:30PM

Y-M-D hm

To change the Clock Settings:

See step 4 of the "Initial Settings".

]

Contact Information

Website: www.brother.ca

TEL:1-877-Brother

to cancel.)

Solution

to turn the machine back on.

(

+ )

to save your

(

)

Example

(October 21st 2007, 3:30PM)

21.10.07

21.10.07 03:30PM

07-10-21

07-10-21 03:30PM