AEG L 77699 PFL Panduan Pengguna - Halaman 24

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin cuci AEG L 77699 PFL. AEG L 77699 PFL 28 halaman.

Halaman Cetak

www.aeg.com

Problem

The appliance does not

fill with water and drain

immediately.

The appliance does not

drain the water.

The spin phase does not

operate or the washing

cycle lasts longer than

usually.

There is water on the

floor.

You cannot open the ap-

pliance door.

The appliance makes an

unusual noise.

Possible solution

Make sure that the drain hose is in the correct position. The

hose may be too low.

Make sure that the sink spigot is not clogged.

Make sure that the drain hose has no kinks or bends.

Make sure that the drain filter is not clogged. Clean the filter, if

necessary. Refer to 'Care and cleaning'.

Make sure that the connection of the drain hose is correct.

Set the drain programme if you set a programme without drain

phase.

Set the drain programme if you set an option which ends with

water in the tub.

Set the spin programme.

Make sure that the drain filter is not clogged. Clean the filter, if

necessary. Refer to 'Care and cleaning'.

Adjust manually the items in the tub and start the spin phase

again. This problem may be caused by balance problems.

Make sure that the couplings of the water hoses are tight and

there is not water leakages.

Make sure that the drain hose have no damages.

Make sure you use the correct detergent and the correct quan-

tity of it.

Make sure that the washing programme is finished.

Set the drain or the spin programme if there is water in the

drum.

Make sure that the appliance receives electrical power.

This problem may be caused by a failure of the appliance.

Contact the Authorised Service Centre. If you need to open

the door, please read carefully «Emergency door opening».

Make sure the levelling of the appliance is correct. Refer to 'In-

stallation'.

Make sure that the packaging and/or the transit bolts are re-

moved. Refer to 'Installation'.