AEG L 83480 SFL Panduan Pengguna - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin cuci AEG L 83480 SFL. AEG L 83480 SFL 28 halaman.
Halaman Cetak14
www.aeg.com
The related indicator comes on.
7.5 Manchas-Nódoas/Prelava.
Press this button to add the stain and/or
a prewash phase to a programme.
Press the button again and again to
activate one or two options. The related
symbol and the indicator bar comes on
in the display.
• Manchas/Nódoas: Use this option for
laundry with hard stains to remove.
When you set this option, put the
stain remover into compartment
This function increases the
programme duration.
This option is not
available with a
temperature lower than
40° C.
• Prelava.: Use this option to add a
prewash phase before the washing
phase.
We recommend that you use this
option when you have laundry with a
high level of soil.
8. SETTINGS
8.1 Acoustic signals
The acoustic signals operate when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press Manchas/Nódoas Prelava.
and Extra Aclarado - Enxag. at the same
time for 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
8.2 Child Lock
With this option you can prevent that the
children play with the control panel.
The set of this option
increases the programme
duration.
7.6 Centrif.
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only
the spin speeds available
with the set programme.
• Deactivate the spin phase.
• Activate the Rinse Hold function.
.
Set this function to prevent fabric
creases. The appliance does not drain
the water when the programme is
completed.
7.7 Temp.
Press this button to change the default
temperature. When the display shows
and
, the appliance does not heat
the water.
• To activate/deactivate this option,
press Temp. and Centrif. at the same
time until the indicator
goes off.
You can activate this option:
• After you press Inicio/Pausa : the
options and the programme knob are
locked.
• Before you press Inicio/Pausa : the
appliance cannot start.
8.3 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.
• To activate/deactivate this option
press Extra Rapído and Inicio Diferido
at the same time until the indicator
Extra Aclarado/Enxag. comes on/
goes off.
comes on/