AEG L 87406 FL Panduan Pengguna - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin cuci AEG L 87406 FL. AEG L 87406 FL 28 halaman. Clothes washer
Halaman Cetak5.
Measure out the detergent and the
fabric conditioner.
6.
Carefully close the detergent dis-
penser. Make sure that the flap
does not cause a blockage when
you close the drawer.
8.3 Set the delay start
1.
Press button
5
til the display shows the number of
minutes or hours. The related sym-
bols comes on.
2.
Press button
4
starts the countdown of the delay
start.
When the countdown is completed,
the programme starts automatically.
Before you press button
start the appliance, you can can-
cel or change the set of the delay
start.
You cannot set the delay start
with the Steam programme.
8.4 Cancel the delay start
1.
Press button
4
tor flashes.
2.
Press button
5
til the display shows 0'.
3.
Press button
4
starts.
8.5 Setting and starting a
programme
1.
Turn the programme knob. The rela-
ted programme indicator comes on.
again and again un-
, the appliance
to
4
. The related indica-
again and again un-
. The programme
4.
To use liquid detergent, turn the
flap down.
With the flap in the position
DOWN:
– Do not use gelatinous or thick
liquid detergents.
– Do not put more liquid deter-
gent than the limit showed in
the flap.
– Do not set the prewash phase.
– Do not set the delay start func-
tion.
2.
The indicator of button
with red colour.
3.
The display shows the default tem-
perature, the spin speed and the
empty indicator bars of the available
functions.
4.
To change the temperature and/or
the spin speed, press the related
buttons.
5.
Set the available functions.
6.
Press button
4
gramme. The indicator of button
is on.
The drain pump can operate for
a short time when the appliance
fills water.
The appliance adjust auto-
matically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximate-
ly 15 minutes from the start of
the programme, the display
shows the new time value.
8.6 Interrupt a programme
1.
Press button
4
flashes.
ENGLISH
17
flashes
4
to start the pro-
4
. The indicator