AEG L 87685 FL Panduan Pengguna - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin cuci AEG L 87685 FL. AEG L 87685 FL 36 halaman.
Halaman Cetak
10
L
START/PAUSE BUTTON
Press button
programme.
DELAY START BUTTON
Press button
programme from 30 minutes to 20
hours.
TIME SAVE BUTTON
Press button 6 to decrease the duration
of the programme.
– Press one time to set 'Shortened du-
ration' for items with daily soil.
– Press two times to set 'Extra Quick'
for items with light soil.
Some programmes accept only
one of the two functions.
EXTRA RINSE BUTTON
Press button
to a programme.
Use this function for persons allergic to
detergents and in areas where the wa-
ter is soft.
THE STAIN-PREWASH
BUTTON
Press button
a prewash phase to a programme.
Press the button again and again to ac-
tivate one or two options. The related
The value shows the total number of the rinses.
The indicator bar is fully filled when you set to the maximum
number of rinses.
The Stain symbol comes on when you activate the function.
The Prewash symbol comes on when you activate the func-
tion.
The indicator bar is not fully filled when you set only one of
the functions.
The indicator bar is fully filled when you set the two func-
tions.
to start or interrupt a
4
5
to delay the start of a
5
6
7
7
to add rinsing phases
8
8
to add the stain and/or
symbol and the indicator bar comes on
4
in the display.
STAIN
• Use this function for laundry with
hard stains to remove.
When you set this function, put the
stain remover into compartment
This function increases the pro-
gramme duration.
PREWASH
• Use this function to add a prewash
phase before the washing phase. We
recommend that you use this func-
tion when you have laundry with a
high level of soil.
SPIN BUTTON
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function.
Set this function to prevent fabric
creases. The appliance does not
drain the water when the programme
is completed.
This function is not available
with a temperature lower than
40° C.
The set of this function increa-
ses the programme duration.
9
The display shows only the spin
speeds available with the set
programme.
.