Brother PT-P900W Panduan Pengaturan Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Pembuat label Brother PT-P900W. Brother PT-P900W 9 halaman.

Halaman Cetak
Brother PT-P900W Panduan Pengaturan Cepat
Inserting a Tape Cassette
The TZe, HGe tape, FLe label and HSe tube cassettes can be used in your
P-touch Label Printer.
IMPORTANT
If the new tape cassette has a cardboard stopper,
be sure to remove the stopper before inserting the
cassette.
1.
Check that the end of the tape is not bent and that it passes through the
tape guide. If it does not, pass it through the tape guide as shown in the
illustration.
1
2
1
End of tape
2
Tape guides (The actual shape may be different depending on
the tape width.)
2.
Press the cover open button to open the tape compartment cover.
3.
Insert the tape cassette into the tape cassette compartment with the end
of the tape facing the P-touch Label Printer's tape exit slot, then push
down evenly until the tape cassette is installed correctly.
1
1
IMPORTANT
•
When inserting the tape cassette, make sure that the tape and ink
ribbon do not catch on the print head.
•
Make sure that there is no slack in
the tape, and then carefully insert
the tape cassette. If there is slack
in the tape, the tape will catch on
the protrusion (2) when the
cassette is inserted and become
bent or wrinkled, causing the tape
to jam.
To fix the slack in the tape, refer to
the illustration in step 1 and pull the tape outside of the tape guide.
•
When removing the tape cassette, make sure that the tape does not
catch on the protrusion (2).
4.
Close the tape compartment cover.
IMPORTANT
Store tape cassettes in a cool dark location, away from direct sunlight
and high temperature, high humidity, or dusty locations. After opening
the sealed package, use the tape cassette as quickly as possible.
1
2
Tape exit slot
2
Turning Power On/Off
On: Press the
(Power) button to turn the P-touch Label Printer on. The
(Power) indicator lights in green.
Off: Press and hold the
(Power) button again to turn the P-touch Label
Printer off. The
(Power) indicator may light in orange until the power is off.
IMPORTANT
When turning the P-touch Label Printer off, do NOT remove the battery
or disconnect the AC adapter until the orange
off.
Connecting to a computer
PT-P900W
Basic Setup
Operating Systems
USB port
®
/ 
Windows Vista
®
7/ 
Windows
®
8 / 8.1 
Windows
®
10 / 
Windows
®
2008 / 
Windows Server
2008 R2 
®
2012 / 
Windows Server
2012 R2
Mac OS X v10.9.5, 10.10.x,
10.11
PT-P950NW
Basic Setup
Operating Systems
USB port
®
/ 
Windows Vista
®
7/ 
Windows
®
8 / 8.1 
Windows
®
10 / 
Windows
®
2008 / 
Windows Server
2008 R2 
®
2012 / 
Windows Server
2012 R2
Mac OS X v10.9.5, 10.10.x,
10.11
NOTE
The compatible operating systems may change. For the latest
information, visit our support website at support.brother.com.
(Power) indicator turns
Serial port
(ESC/P and
P-touch
LAN port
Template
only)
–
r
Serial port
(ESC/P and
P-touch
LAN port
Template
only)
r
r
r
–
r
–