Brother QL 570 - P-Touch B/W Direct Thermal Printer Panduan Penyiapan & Pengoperasian - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Penyiapan & Pengoperasian untuk Pembuat label Brother QL 570 - P-Touch B/W Direct Thermal Printer. Brother QL 570 - P-Touch B/W Direct Thermal Printer 45 halaman. Professional label printer
Juga untuk Brother QL 570 - P-Touch B/W Direct Thermal Printer: Brosur (4 halaman), Panduan Pengguna (36 halaman), Panduan Pengguna (26 halaman), Panduan Pengguna (40 halaman), Panduan Penyiapan & Pengoperasian (43 halaman), Panduan Pengguna (2 halaman), Panduan Instalasi Perangkat Lunak (15 halaman)

Thread the end of the DK Roll into the

slot until it align to the area shown

right.

Align the end of the roll with the upright

edge of the label output slot.

Close the DK Roll compartment cover.

When you press the ON/OFF button ( ) to

turn the Brother QL-570 on, the end of the

DK Roll is aligned automatically.

Connect the power cord to the Brother QL-570

and then plug the power cord into a electrical

outlet.

Check that the electrical outlet is 120V AC before

•

plugging the power cord.

Unplug the power cord from the electrical outlet

•

after you have finished using the Brother QL-570.

Do not pull the power cord when unplugging it from

•

the electrical outlet. The wire in the power cord may

become damaged.

Do not connect the Brother QL-570 to the computer

•

until directed to do so when installing the printer

driver.

STEP