AEG L 98699 FL Panduan Pengguna - Halaman 29

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mesin cuci AEG L 98699 FL. AEG L 98699 FL 40 halaman. Aeg washer user manual
Juga untuk AEG L 98699 FL: Panduan Pengguna (44 halaman), Panduan Pengguna (40 halaman), Panduan Pengguna (32 halaman)

Halaman Cetak

Problem

The appliance

fills with water

and drain imme-

diately.

The washing re-

sults are not sat-

isfactory.

The internal lamp

is off.

After a steam

programme, gar-

ments are partial-

ly wet.

After a steam

programme, gar-

ments are not

sufficiently

smooth.

The drum is emp-

ty and the dis-

play shows there

is some weight

in .

The drum is full

but the display

shows 0.0 kg.

After the check, activate the appliance.

The programme continues from the

point of interruption.

If the problem occurs again, contact the

service centre.

Possible cause

You did not remove the

packaging and/or the

transit bolts.

The load is very small.

The end of the drain

hose is too low.

The detergent you used

was not sufficient or cor-

rect.

You did not remove the

stubborn stains before

you wash the laundry.

You set a not correct

temperature.

Too much laundry load.

The lamp is burned.

The appliance is not ac-

curately levelled.

A wrong STEAM pro-

gramme has been selec-

ted (e.g. Synthetic in-

stead of Cotton).

Excessive laundry load.

It is necessary to set a

tare.

You loaded the laundry

before to activate the

appliance.

Possible solution

Remove the packaging and/or

the transit bolts. Refer to 'Instal-

lation'.

Add more laundry in the drum.

Make sure that the drain hose is

in the correct position.

Increase the detergent quantity

or use a different one.

Use special products to remove

the stubborn stains.

Make sure that you set the cor-

rect temperature.

Decrease the laundry load.

To replace the lamp, contact

the service centre.

Check the levelling and adjust

the appliance by raising or low-

ering the feet.

Note the composition of the

fabric.

Reduce the laundry load

Press button

the appliance and to activate it

again.

Press button

the appliance . Empty the drum

and obey to the necessary

steps. (Refer to 'Loading the

laundy')

If the display shows other alarm mes-

sage, contact the service centre.

ENGLISH

to deactivate